On Dec 21, 2011, at 16:41 36, Nathan Steele wrote: > I just got a hand full of ASI 6012 Cards and have a few questions. I am > using Rivendell 2.0.2 on centos, fromt he paravel broadcast appliance > disk. I was formerly using an m-audio delta 1010. Is it as simple as > pulling the delta and installing 2 AS! 6012's to replace it?
Pretty much, yes. You may want to run RDAlsaConfig and disable any ALSA devices so any built-in mobo devices don't get picked up, but it's not essential. > The ASI's have some jumper that seems to be for a card ID, like card 1, card > 2. I > can not find any reference to these jumpers on the asi page, only docs > for that model are a datasheet that does not mention jumpers, only that > "up to 8 cards can be used in a single system". Basically, that's a card ID (called an 'Adapter Index' in the ASI docs). Each ASI card in a given computer needs to have a unique ID. If you only have a single card in a computer, just leave it set to '1'. > Obviously I will need to reconfigure the audio settings in rdadmin, but > if I understand correctly, the HPI drivers are already installed? Likely not even that. The HPI drivers are already there, and should 'just work'. Cheers! |-------------------------------------------------------------------------| | Frederick F. Gleason, Jr. | Chief Developer | | | Paravel Systems | |-------------------------------------------------------------------------| | A room without books is like a body without a soul. | | -- Cicero | |-------------------------------------------------------------------------| _______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
