The On Air Flag changes what is included in the reports. You might be able to turn off the other machine by using RML send eg. a macro that enables the flag on the local computer but also sends a command to switch off the flag on another.
Hope this helps Stan On 1/03/12 7:23 AM, Tom Dawson wrote: > Hi all, > > Looking for some advice on the On-Air Flag. I have assumed that this > determines the state of things like the Now& Next data from > RDAirPlay...i.e. stopping the transmission of this data when the flag is > set to 0, however, after having set the flag to 0 using RML "TA 0!" as > taken from the Wiki, Now& Next data is still being transmitted. Perhaps > I have the wrong end of the stick, and the flag is literally just the > red box around the pie/clock, but it would be really handy to have the > ability to mark a machine as off-air when another is in use, to disable > the transmission of Now& Next data from the 'off-air' machine (which > may still be used for training purposes, but where it would not be > desirable to have Now& Next info updated). > > If anyone has any tips or comments it would be appreciated! > > Tom Dawson > FANTASY RADIO > Devizes, Wiltshire, UK > www.fantasyradio.co.uk > _______________________________________________ > Rivendell-dev mailing list > [email protected] > http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev > _______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
