Aah i see that's right, great thanks for that. Cheers, Lee
On Fri, Apr 13, 2012 at 9:59 AM, Andy Sayler <[email protected]> wrote: > Try e-mailing Fred G directly. His address is in one of the previous > responses to this thread. Although next week is NAB, so a lot of people on > the industry may be tied up temporarily preping for that. > On Apr 12, 2012 5:53 PM, "Lee Baker" <[email protected]> wrote: > >> Hi all, I am looking at the Axia Software Audio IP Driver for RD and have >> been trying to contact Paravel Systems but their sales team have not yet >> contacted me back for the past two weeks now. Does anyone know how else to >> contact them? I'd like to find out how to obtain the Software driver. >> >> Cheers >> Lee >> >> On Sun, Apr 1, 2012 at 7:20 AM, Chris Cmolik (Chief Engineer, WITR Radio) >> <[email protected]> wrote: >> >>> We got the Alsa driver working correctly... it went something like this: >>> $ tar -xzvf hpklinux-blah.tar.gz >>> $ cd hpklinux-blah >>> $ ./configure >>> $ cd alsa >>> $ make && sudo make install >>> $ cd .. >>> $ cd firmware >>> $ sudo make install >>> >>> You need alsa, linux kernel source, and linux headers installed. >>> >>> We can't get JACK to recognize more than two channels on our card (an >>> ASI 6585 with 8 ins and 8 outs.) >>> >>> On Thu, Mar 29, 2012 at 11:42 PM, Andy Sayler <[email protected]> wrote: >>> >>>> Do you need a Windows or Linux version of the driver? How many channels? >>>> >>>> Last I checked, you could get a single stereo pair version of the >>>> driver designed for Windows directly from Axia. Multi-channel windows >>>> versions of the driver are sold via a third party (not sure who). If you >>>> need a Linux version of the driver, I think Fred's company (Parevel >>>> Systems <http://www.paravelsystems.com/>) is the sole supplier. I'm >>>> sure he can confirm and help you out. >>>> >>>> Once you find out, I'd also be interested in seeing pricing info on >>>> this. We wound up just buying the AudioScience Livewire sound cards to get >>>> Livewire I/O on our Linux machines. We tried using an early version of the >>>> Linux Livewire driver for a bit, but found it too difficult to obtain a new >>>> version every time we wanted to update Linux since it was only distributed >>>> as a pre-compiled binary tied to a specific kernel version. We don't >>>> actually need any of the extra capabilities of the AudioSciene hardware >>>> (hardware decoding, time scaling, etc), however, so it would be nice to >>>> have access to a more cost effect software based solution (assuming it >>>> could be provided in a format that gives one enough flexability to upgrade >>>> and maintain various Linux kernel versions as they see fit). The >>>> AudioScience cards are a little steep when all you need is 2 to 3 channels >>>> of basic Livewire I/O for a Rivendell machine. >>>> >>>> Maybe one day the driver will OpenSource and merged into the mainline >>>> Linux kernel... then everyone would be using Livewire and Rivendell "out of >>>> the box"! ;-) >>>> >>>> Report back with what you find! I'm curios about the cost and >>>> distribution methods of the driver for future reference. >>>> >>>> -Andy >>>> www.andysayler.com >>>> >>>> >>>> >>>> On Thu, Mar 29, 2012 at 21:27, Lee Baker <[email protected]>wrote: >>>> >>>>> Hi All, i'm quite interested in the Axia Livewire Software IP Driver. >>>>> Does anyone know where to obtain this? or is it something that needs to be >>>>> purchased from Axia? >>>>> >>>>> >>>>> On Tue, Mar 13, 2012 at 7:39 AM, Guy Curtis < >>>>> [email protected]> wrote: >>>>> >>>>>> We are expanding the stations equipment and boss has asked me to get >>>>>> this information from Rivendell manufacturers, so i figured id come to >>>>>> the >>>>>> community. >>>>>> >>>>>> Will Rivendell control Axia Router Switcher TEL-200100134 through >>>>>> Axia Livewire tech to route the audio and how would one go about doing >>>>>> it. >>>>>> >>>>>> With regards to the audio drivers with said equipment: >>>>>> Axia offers a single I/O driver or multi-I/O driver, would be be able >>>>>> to run rivendell using the single I/O driver if we have multiple cards >>>>>> feeding all audio into a single seperate card? >>>>>> When using sound panel does it just put item into list or overlay the >>>>>> audio how does it work to do this? >>>>>> >>>>>> _______________________________________________ >>>>>> Rivendell-dev mailing list >>>>>> [email protected] >>>>>> http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev >>>>>> >>>>>> >>>>> >>>>> _______________________________________________ >>>>> Rivendell-dev mailing list >>>>> [email protected] >>>>> http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> Rivendell-dev mailing list >>>> [email protected] >>>> http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev >>>> >>>> >>> >>> >>> -- >>> Chris Cmolik >>> Chief Engineer, WITR Radio >>> <[email protected]> >>> 32 Lomb Memorial Drive >>> Rochester, New York 14623 >>> WITR Office: 585.475.2000 >>> >>> >>> *CONFIDENTIALITY NOTE:* The information transmitted, including >>> attachments, is intended only for the person(s) or entity to which it is >>> addressed and may contain confidential and/or privileged material. Any >>> review, retransmission, dissemination or other use of, or taking of any >>> action in reliance upon this information by persons or entities other than >>> the intended recipient is prohibited. If you received this in error, please >>> contact the sender and destroy any copies of this information. >>> >>> >>> >>> >>> _______________________________________________ >>> Rivendell-dev mailing list >>> [email protected] >>> http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev >>> >>> >> >> _______________________________________________ >> Rivendell-dev mailing list >> [email protected] >> http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev >> >> > _______________________________________________ > Rivendell-dev mailing list > [email protected] > http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev > >
_______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
