|
Similar problem; We're streaming using Abacast (uggh) that takes in Now-Next data via serial port, I have the serial rlm compiled and installed but it doesn't appear to be working. I followed these instructions here http://rivendell.tryphon.org/wiki/Rivendell_Loadable_Module_SDK_-_For_Sending_Now_%26_Next_Data_to_external_systems but used appropriate rlm code for 2.2 which is what we're running here. Thanks -- Matthew A. Chambers, CBT Assist. Broadcast Engineer KWIX - KRES - KIRK - KTCM 300 West Reed Street Moberly, MO 65270 660-263-1500 FAX: 660-269-8811 Cell: 660-676-3219 www.centralmoinfo.com Super Station KRES 104.7 FM Information Radio KWIX 1230 AM The Captain KIRK 99.9 FM Glory KTCM 97.3 FM  This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. On 5/13/2012 12:48 AM, Tom Dawson wrote: Hello all, After struggling with netcat for a while, I decided to try out the instructions found elsewhere on the Wiki, i.e. instead of using netcat to grab data, running some RML to get the now playing data out to the song.dat file as used in streamdata... Run:RN echo %a - %t# > /home/fantasy/streamdata/song.dat! This has been working perfectly - with no change to the streamupdate.sh script, I'm just writing straight to the file with RML, not relying on netcat. However two nights in a row now, RDAirPlay appears to have just *stopped* echoing out to the song.dat file halfway through the night. However if you restart RDAirPlay it continues just fine. So I've gone back to netcat for now but any ideas why this might be happening? I know, I know, upgrade to 2.x - it's on the cards, honestly :) Thanks Tom Dawson FANTASY RADIO www.fantasyradio.co.uk On 10/05/2012 16:24, Fred Gleason wrote:On May 10, 2012, at 07:32 59, Geoff Barkman wrote:Anyone else had this problem and how did you solve it?Upgrade to 2.x, which includes an RLM for updating Shoutcast. Alternatively, you could backport that RLM to v1.x. Cheers! |-------------------------------------------------------------------------| | Frederick F. Gleason, Jr. | Chief Developer | | | Paravel Systems | |-------------------------------------------------------------------------| | A room without books is like a body without a soul. | | -- Cicero | |-------------------------------------------------------------------------| _______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev_______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev |
_______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
