Thanks Robert Jeffares for responding. I will post my results below in
your email:
=============
>> run aplay -L in a terminal and see which order the cards are being
detected.
rduser@CampusRadio4:~$ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=I82801BAICH2
Intel 82801BA-ICH2, Intel 82801BA-ICH2
Default Audio Device
front:CARD=I82801BAICH2,DEV=0
Intel 82801BA-ICH2, Intel 82801BA-ICH2
Front speakers
surround40:CARD=I82801BAICH2,DEV=0
Intel 82801BA-ICH2, Intel 82801BA-ICH2
4.0 Surround output to Front and Rear speakers
surround41:CARD=I82801BAICH2,DEV=0
Intel 82801BA-ICH2, Intel 82801BA-ICH2
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=I82801BAICH2,DEV=0
Intel 82801BA-ICH2, Intel 82801BA-ICH2
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=I82801BAICH2,DEV=0
Intel 82801BA-ICH2, Intel 82801BA-ICH2
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
iec958:CARD=I82801BAICH2,DEV=0
Intel 82801BA-ICH2, Intel 82801BA-ICH2
IEC958 (S/PDIF) Digital Audio Output
rduser@CampusRadio4:~$
===
This looks like I have just one sound card to me. Which I do only have
one sound card
+++++++++++++++++++
>> run speaker-test with -D set to correct card if it's not the 0 card
and see what the card defaults to.
rduser@CampusRadio4:~$ speaker-test
speaker-test 1.0.22
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2229 to 17832
Period size range from 1114 to 1115
Using max buffer size 17832
Periods = 4
was set period_size = 1114
was set buffer_size = 17832
0 - Front Left
=====
Looks like its defaulting to 48000 to me.
+++++++++
>> Then see if the card will go to 44100 [ -r 44100 ]
rduser@CampusRadio4:~$ speaker-test -r 44100
Playback device is default
Stream parameters are 44100Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
Rate set to 44100Hz (requested 44100Hz)
Buffer size range from 2048 to 16384
Period size range from 1024 to 1024
Using max buffer size 16384
Periods = 4
was set period_size = 1024
was set buffer_size = 16384
0 - Front Left
Time per period = 2.471211
0 - Front Left
Time per period = 2.799536
0 - Front Left
====
Yep!
+++++++++++++
>> Check the setting in rdadmin>systemsettings and make sure it's set to
44100
====
Did that numerous times.
+++++++++
Now what?
-- Mike
========================================
--
Mike
Station Engineer WVMC-FM
-------------
http://www.wvmcfm.com
Mansfield 90.7
Ashland 91.1
Wooster 102.7
Butler 99.1
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
