Thanks, I suspected that was the answer. Not that the storage will be a problem, but this will actually make a second copy of the audio in /var/snd, right? or will it just make a symlink (is that the right term......?)
Nathaniel C. Steele Assistant Chief Engineer/Technical Director WTRM-FM / TheCrossFM On 8/6/2012 4:59 PM, Geoff Barkman wrote: > The daypart times can't pass midnight. > What I would do is duplicate the cut inside the cart. > Its very easy hit the copy button inside the cart ... then hit the Add > button and then Paste button to paste the cut into the new cut > position. > Make one cut play between 00:00:00 and 18:00:00 > and the other 21:00:00 and 23:59:59 > > Many Thanks > Geoff Barkman > > On Tue, Aug 7, 2012 at 8:36 AM, Nathan Steele > <[email protected]> wrote: >> I have some cuts I don't want to air during particular shows, these have >> the announcers voice and we don't want them to air during their on air >> shift. for example on shift is 6pm -9pm. in the cut settings, daypart i >> put start time as 21:00:00 and end time as 18:00:00. the cut showed red >> even though it should have been allowed to play at the time. I reversed >> the times and it stayed red, which seemed correct because current time >> was not between those times. What am I doing wrong? can I not Span the >> day like that? >> >> >> Thanks, >> >> -- >> Nathaniel C. Steele >> Assistant Chief Engineer/Technical Director >> WTRM-FM / TheCrossFM >> >> _______________________________________________ >> Rivendell-dev mailing list >> [email protected] >> http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev > _______________________________________________ > Rivendell-dev mailing list > [email protected] > http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev > > > _______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
