On Sun, 2012-08-26 at 21:34 -0600, Scott D. Henning wrote: > I would like to evaluate RD with the on-board sound card. Has onyone > done this? I note the Wiki lists two on-board drivers, but am unclear if > the Appliance CD image will be able to use them.
Not to sure on the actual appliance image but: (this should be very compatable) RHEL 6.0 - 6.3 (Including CentOS 6.0 - 6.3): From alsa-info|lspci: 2 [CA0106 ]: CA0106 - CA0106 Live! 7.1 24bit [SB0410] at 0xa400 irq 19 That card works definately for sure. I have a Creative Audigy also that I *think is workable also*. No testing yet on it. That's with alsa 1.0.21 and a PoC Build of 'rivendell-2.1.5-1.el6_BETA.x86_64'. 'rdalsaconfig', will show the available cards to configure. As long as the card is supported by alsa you should not have a problem. What you can do is grab the CentOS Live Disk Image (centos.org) and then you should be able to check to see if alsa supports your card. If it does then the appliance image should work also. Disclaimer: I have never used the Appliance Image for testing or evaluation. I roll my own. So in theory this should be compatable and alsa drivers available. My poc build of 'rivendell' requires: libasound.so.2()(64bit) libasound.so.2(ALSA_0.9)(64bit) libasound.so.2(ALSA_0.9.0rc4)(64bit) so i'm thinking Fred G. builds the appliance to require it also. If not then Fred G. can correct me on that part please.
signature.asc
Description: This is a digitally signed message part
_______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
