Very interesting piece of software, I didn't get chance to play with the BETA but it was on my todo list. One question probably outside of the scope of the software, what if I wanted to run it as a broadcast codec, effectively swap the endpoints around so that the receiver connected to the transmitter (to get around firewalls on the receiver end)?
I assume the transmitter is connecting to the receiver at the moment? I'm currently looking at various traditional IP codecs and it pains me to look at mini itx, 8mb of compact flash all wrapped up in a 1U box running linux yet it sets you back £1500 (I had to fix a fan on an MDO Audio TX STL-IP, I couldn't believe there was a normal PC motherboard in there). Feel free to message me off list to save spamming RD (if necessary). Regards, Wayne -----Original Message----- From: [email protected] on behalf of James Harrison Sent: Mon 22/10/2012 22:27 To: User discussion about the Rivendell Radio Automation System Subject: [RDD] OpenOB 2.3 release -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I know a few Rivendellers have used the earlier (beta) versions of OpenOB in the past so here's a quick notice to all that OpenOB 2.3 is out, with stable support for the Opus codec recently standarized by the IETF, which supports bitrates as low as 16kbps or up to 384kbps with a variety of audio bandwidths. OpenOB is the open outside broadcast tool, an audio over IP link tool which makes moving audio over a network in realtime with very low latencies (<10ms in PCM mode, <50ms in Opus mode) fairly trivial. Other improvements include proper Python packaging for easy installation, reliability improvements, visual feedback changes and an improved command line interface. Support for the Raspberry Pi single-board computer has now been tested, confirmed and verified. It works out of the box with no issues using USB sound cards. This means you can put a link together (both ends) for under £200. You can nab yourself a copy here: http://jamesharrison.github.com/openob/ - all you need is two computers running Linux. </list-hijack - sorry!> - -- Cheers, James Harrison -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.17 (MingW32) Comment: Using GnuPG with Mozilla - http://www.enigmail.net/ iEYEARECAAYFAlCFujwACgkQ22kkGnnJQAz4cACgkHnoB2JHSBcCNnyVvx+cclb9 mwIAn2N4PdieHesX1H/WoBuft0j5vLEP =3NB7 -----END PGP SIGNATURE----- _______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev ####################### Scanned by MailMarshal ####################### ############ Attention: The information contained in this message is confidential and intended for the addressee(s) only. If you have received this message in error or there are any problems, please notify the originator immediately. The unauthorised use, disclosure, copying or alteration of this message is strictly forbidden. Christian Vision or any of its subsidiaries will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any virus being passed on. Please note that we reserve the right to monitor and read any e-mails sent or received by the company under the Telecommunications (Lawful Business Practice) (Interception of Communications) Regulation 2000. Christian Vision is registered in England as a limited company 2842414 and as a charity 1031031 ############
<<winmail.dat>>
_______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
