On Tue, Nov 13, 2012 at 10:56 PM, Lorne Tyndale <[email protected]>wrote:
> Hi, > > Check within alsamixer that you have the correct input selected and the > levels on that input are set, and that it is not set to mute. > Yes, the correct input was selected as i was able to monitor the audio from the soundcard out. > > Also check your jack setup. Sometimes it helps to start up one of the > Jack level indicators (something like meterbridge works well) and route > your audio input to it, so you can see if you're getting levels on the > input you're trying to record. > Could somebody explain the messages [DEBUG] I am getting? > > If you're getting an mp3 file which actually has some length, but > recorded silence, I would suspect an audio input issue. > > The correct time and expected time (1 hour, 60mb+ of 160kbps mp3) of audio was created. Thanks for the replies. Bruce L.D. Mones Technical Vanguard Radio Network Philippines > > Hello, > > > I'm trying to deploy rotter to complement my Rivendell set-up. I was > > able to install rotter from source to OpenSUSE 11.4 and was able to > > spit out an mp3 file but unfortunately the mp3 file is empty i.e. > > silence only. > > > _______________________________________________ > Rivendell-dev mailing list > [email protected] > http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev >
_______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
