OK, the kernel update must have broke it, booting up in the next most recent kernel version seems to have solved the problem.
I would like to know how to fix it on the current kernel, or how to permantly make the system boot into the kernel version that works. Of course I do not do updates after a system is in production (unless needed) , but generally do all updates when building new system. Thanks, Nathaniel C. Steele Assistant Chief Engineer/Technical Director WTRM-FM / TheCrossFM On 1/7/2013 5:15 PM, Nathan Steele wrote: > I just did the 2.3.0 update on a system I was going to press into > service this week. I went ahead and did the other updates it wanted to > do in addition to the rivendell update. this is a Broadcast appliance > install with two ASI 6012 cards installed and working prior to the > update. lspci still shows the cards, but the rivendell hpi config says > the drivers are not installed. > > I tried insmod /lib/modules/2.6.18-194.26.1.el5/extra/asihpi.ko and was > returned the error "error inserting asihpi.ko : no such device" (this > was suggested when I was diagnosing a problem with these cards on a > different system, which turned out to be a BIOS problem, but figured I > would go through the steps before asking for help again) > > I have tried rebooting, and just restarting rivendell, to no avail. > > any suggestions? can I roll back the updates? I can always start over, > this is not yet a production system, but was hoping to put it online > this week. do you think the kernel update broke it? > > thanks > _______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
