Hello, I'm running into an issue with one particular cart-GPIO combination, and can't seem to get it working and wanted to ask for some advice.
I have one machine set up to sense GPI changes, and then execute a macro cart connected to that GPI as set up in RDAdmin. The Macro in the cart is a UDP send (UO) to another machine which processes it. All of the other cart-GPI configurations with similar configurations seem to work just fine. Also, if I execute the actual cart (53005) from RDLibrary, it works as well. The RipCD log shows the GPI sense, then the UO command being sent via UDP: 10/02/2013 - 23:59:50.892 : GPI 0:5 OFF 10/02/2013 - 23:59:50.892 : received rml: 'EX 53005!' from xxx.xxx.xxx.101 10/02/2013 - 23:59:50.893 : received rml: 'UO xxx.xxx.xxx.102 6000 GPO 2 ON!' from xxx.xxx.xxx.101 10/02/2013 - 23:59:50.893 : Sending "GPO 2 ON" to xxx.xxx.xxx.102:6000 10/02/2013 - 23:59:51.892 : GPI 0:5 ON Also, GPIlog shows the pin firing just fine. Has anyone seen this before. Any suggestions? Thanks in advance. Brian _______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
