Am 2013-04-24 14:47, schrieb Lee Baker: > Oh I see now! > So now for my next question, my radio station has a telephone hybrid > which > uses a voip ATA. > Currently what we have to do to put a caller to air, if a call comes > in on > the studio number it is answered from the studio phone and then the > announcer has to transfer the call to the hybrid extension, pick the > call up > using a normal PSTN phone and then place the call to air. > > Would OAP alleviate the need to do this by handling the transfer from > the > push of a button on the console screen?
This could be done like this in the future: Call comes in on the studio number. Call is being shown in OAP Screener. You now have multiple options: 1. take the call with a studio or screener phone (just select the right device on the right) and push answer. This will connect the call to the selected number. If the phone is in auto-answer mode you have the caller directly on the line. 2. take the call with blink or your voip ata. Just create an extension in yate and register your ata with yate. select the device which you configured in studio1.conf on the yateconnector and there you go. Another hint, because it's not obvious: If you click on the line number you will get a details dialog where you can fill in the name, town, or whatever you have screened prior to take the call on air. Best regards Sascha _______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
