Hello,
Has anyone tried switching between ports 3 and 4 on a Broadcast Tools SS4.4
with Rivendell? I am successfully able to switch Ports 1->2, 2->1 but cannot
make ports 3->4 and 4->3 work. It's correctly identified in RDadmin, and all
four ports in the matrix are labeled.
The RML commands I use are:
ST 4 2 2! (Restore Input 2-> Output 2) Works fine
ST 4 2 1! (Connect Input 1->Output 2) Works fine
ST 4 3 2! (Connect Input 3->Output 2) Works fine
ST 4 3 3! (Restore Input 3-> Output 3) Does not work
ST 4 2 4! (Connect Input 2-> Output 3) Does not work
It basically looks to be that any channel can switch into port 1 and 2 as an
output, but nothing can get switched to ports 3 or 4.
When using the direct serial commands on the switcher, all seems to work fine.
I tried this with the SO command and could not get that to work (which is a
separate issue).
Thanks in advance for any insight.
Brian
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
