What I did was connect the Broadcast Tools switcher to the USB-to-serial
converter and plug the latter into the Rivendell machine, where it showed
up as /dev/ttyUSB0. I could then use rdadmin to map it as Switcher 0, and
Rivendell can now control the switcher.
Rob
On Wed, 5 Mar 2014, Brian McKelvey wrote:
USB-Serial gives you an RS-232 port, but you still have to do something with
that port, connect it to something to interface with, for example. Are you
saying that you can use some of the RS-232 pins as GPIO directly?
Brian
Sent from my iPhone
On Mar 5, 2014, at 3:36 AM, Rob Landry <41001...@interpring.com> wrote:
There's no need; you can use a USB-to-serial adapter. I am doing this on
several stations.
_______________________________________________
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
