On Mar 23, 2014, at 00:02 50, Brandon Sossamon <[email protected]> wrote:
> I'm trying to install a touchscreen on my system (Appliance Disc, > v.2.8.1, CentOS-5) and getting some weird errors. I'm wondering if > something with RD is not set right. Touch screen configuration has nothing whatever to do with RD. It is a purely system-level function. > Error when trying to run calibration (happens with elovaLite as well): > [root@studiomain elo-ser]# ./elova --nvram > Calibration data to be stored in Touchscreen NVRAM (Non-Volatile > Memory) if it exists. > Error: Touchscreen hardware not responding. Check physical connection. > error in ioctl get IOCTL_MM_DIAGNOSTICS > : Success > Elova: All active touchscreens have been calibrated. [Calibrated 0 > touchscreen(s)] FWIW, I have never in +10 years been able to get the (closed-source) calibration software provided by ELO to work on Linux. Unfortunately, there are no good alternatives on BA1/CentOS 5 of which I’m aware. BA2/CentOS 6 is a different story, where xinput_calibrator(1) has worked well with all ELO USB-based touch screens I’ve tested. Cheers! |-------------------------------------------------------------------------| | Frederick F. Gleason, Jr. | Chief Developer | | | Paravel Systems | |-------------------------------------------------------------------------| | A room without books is like a body without a soul. | | -- Cicero | |-------------------------------------------------------------------------| _______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
