Hi Pedro Not specifically your soundcard but I found 5.1 onboard sound card on a mother board that I could successfully channel 2 stereo and 1 mono outputs from. So I set up rdairplay main out to be one output (green socket).... hotkeys to be another (Orange socket) and cue and rdlibrary to go to the mono output (black socket). That was using alsa/pulse for sound management.... when I looked in rdadmin it showed up 1 input and 3 outputs on my soundcard. You select the soundcard number 0 and chose a different port number (0, 1 or 2) to activate each output
Many thanks Geoff Barkman On 10/2/14, Pedro Picoto <[email protected]> wrote: > I use a vintage SB live value for audio output in Reivendell. That card has > a front and rear outputs. > I'm using just one of it's ouputs (wave output on QAS mixer). The other > output corresponds to the Wave surround on the same mixer. My system has > Alsa and Pulse. > > Question: is the a way to adress the rear output to act as a cue output? > _______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
