Hi James, It sounds like something is missing in either your events or clocks, based on the description below it is difficult to tell.
For a good starting point on how to work the Rivendell scheduler, check out the Brett Blog how-to. It is a few years old now, but still a good walk-through. My suggestion - before worrying about scheduling rules and such, start out just getting a full schedule generating (without worrying about scheduler codes, can-con, etc). Build some basic clocks which just fill in with music and such. Then once you're able to get a schedule to fill with audio / carts, then start to add / create scheduling rules for CanCon and such. Also check to ensure you've selected the services and such for your events and clocks. I know it took me several tries to get the scheduler working and generating logs. In case you havn't found it, here's the link to the brett-blog walk-through. http://thebrettblog.wordpress.com/2009/12/31/rivendell-how-to-schedule-music/ Lorne Tyndale > > Hi, > > I am trying to get Rivendell up and running on a new automation system for > CKXU-FM <http://www.ckxu.com> a campus-community radio station in > Lethbridge, Alberta. long story short we are switching from our current > automation system RadioDJ <http://radiodj.ro> to Rivendell in an attempt to > get a more robust and reliable playout/automation system. > > I had previously mentioned a issue with the DB creation on MySQL 5.5 in github > issue #47 <https://github.com/ElvishArtisan/rivendell/issues/47>. To > resolve this on our system I set the default-storage-engine to MyISAM in > the my.cfg config file and it seemed to have corrected the InnoDB issue > (verified all tables are running MyISAM) > > So here is the new issue I am running into, all rivendell services seem to > run fine except for RDLogManager. > Upon creating a log it only inserts a total of 24 events into the log. This > is usually only the first event in the clock for each hour. > This is puzzling me a bit as I have checked that the scheduling rules are > not limiting its selection and there are plenty of carts in the database to > choose from. > I am running version 2.10.2-2 and the database was created on version > 2.10.2 but I have run the command to create the HAS_CODE2 in the DB. > > for the event that is loading I have the scheduler selecting from the music > where category is CC. Music that is imported currently is all done with > dropboxes and assigns the code CC (Canadian Content) to content in the > folder. ie music in the /local-lib/CC/21/[AR]/*/*.flac will be imported and > entered with scheduler codes CC,21,and AR. the scheduler setting limiting > the number of instances in a row has been increased to 900 for all three > categories (also tried 0, not clear on what value would be equivalent to > 'don't restrict' ) > > Do you know of something that I may have improperly configured to cause > this problem? > > Any assistance with this issue would be appreciated. > > here is the system information for this system if needed: > > - Dell T3610, E5-1650 > - 256GB SSD Boot/OS (/var/snd mounted to 3TB 7200 Rpm HDD) > - 16GB 1866MHz DDR3 ECC RDIMM > - Ubuntu 14.04.1 LTS (Desktop) > - MySQL 5.5 (MyISAM default engine) > - Rivendell v2.10.2-2 > - Uses JACK to output on M-Audio Delta 1010LT > > > -- > James Oliver > CKXU Radio Society > SU162 4401 University Drive > Lethbridge, AB > 403-329-2180 > > -- > CKXU Radio Society > SU162, 4401 University Drive West, Lethbridge, Alberta, > www.ckxu.com<hr>_______________________________________________ > Rivendell-dev mailing list > [email protected] > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev _______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
