OK, let's try this again and I'll be more direct. Getting acquainted
with Rivendell Appliance v2.10.2 and want to connect to jackd server in
order to use processing (stereo tool). Here are my specific issues so far:
(1) Since Jack must be run as same owner as Rivendell daemons...
I checked and seem to have a combination of user/owner assignments (no
doubt revealing my linux ignorance).
When I ls -l /var/run/rivendell the result is...
caed and ripcd are "rivendell:root"
jackd and rdcatchd are "root:root"
so, I changed jackd to "rivendell:root" and the result was still no
evidence of jack in the Rivendell host> Audio resource listing, or
Rivendell in the jack connect list. Yes I restarted rivendell services
with no change.
Also, if it matters,
When I ls -l /var the result is...
/var/snd is "rivendell:rivendell"
(2) ...and this is likely a hitch, in Rivendell Manage Hosts>Jack
Settings, I've checked the box to start the server, added the "default"
name, but not sure what goes in the command line(s) for Jack and Jack
clients (if anything).
Probably all very elementary, but perhaps setting specific to the
appliance. Greatly appreciate any suggestions
Eugene
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
