This is usually an apache error e.g. Riv can't talk to the rdexport.cgi
web stuff. You can try looking at /var/log/apache.log to see if that
gives you any more clues.
I don't see how a modem/router change would affect this though as I
assume everything Riv is on the internal lan. If you do have a Riv
server you use its possible its IP changed.
On 2015-08-22 00:13, Steve Atkins wrote:
The cable guy came this week to replace a bad modem (the new device
seems more interested in ipv6 addressing). Probably neither here nor
there, but had to do some extra config stuff for the static ip
address
on the Rivendell box. In order to get it to connect, I had to change
the gateway address on the modem to the same ipv4 address it had been
on the old modem/router. Now, not using my router, just the cable
modem.
Finally got connected again, but now I notice I can't assign markers
to files in the library. and no view of the wav file. The error box
says "Unable to download peak data, error was: RDXport service
returned an error". All other functions seem fine. Not sure where
or
what should I look for?
System is:
rdhost - rivendell 2.10.2 - DB schema 242
CentOs 6.7 final
Kernel Linux 2.6.32-573.3.1.el6.x86_64
GNOME 2.28.2
Hardware: AMD Athlon II X2 270
Mem: 8 Gig
Many thanks for any suggestions!
-steve
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
