Hi all,
Thanks for the hints. Had to wrestle the thing out of a rack to change
DIP switches all while trying to stay on air (not fun).
I've also enabled the serial ports (didn't even know this was an option)
thanks to John's info.
Still coming up short, I'm going to step back from Riv and try and get a
direct serial connection working before I go any further.
Thanks for the help so far.
Wayne Merricks
The Voice Asia
On 16/11/15 13:32, Cowboy wrote:
On 11/16/2015 07:54 AM, Wayne Merricks wrote:
Hi,
I have a Broadcast Tools ACS 8.2 Plus. I'm trying to use it with
Rivendell although at this point I'd settle for any old bash script
that would make it work.
I've added the switcher to the host as matrix 0 (using the ACS 8.2
profile) and tried to use the ST commands but nothing seems to work.
Do I need to set up the port speed or anything else under linux
before I try using macro commands or does Rivendell do this?
Basically I can't find a decent guide to this and wondering if anyone
has an idiots guide to getting these things going?
It's been a while, but I do distinctly remember that you must get the
dip switches
inside the switcher right, else nothing works.
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
