Ben, I've had success using ST and SR with the Delta1010. I use Jack as the audio back end for Rivendell. Your syntax looks good.
The issue I run into is with the SX command. I'd like to duck the audio from the satellite to play imaging components. When I try "SX 2 1 1 -10" on the same cross connect that works on ST/SR, nothing happens. Before digging through the code, I figured I would ask if anyone has run into this. Brian -- Brian P. McGlynn Sent from my iPhone > On Aug 27, 2016, at 22:39, Ben Blevins <[email protected]> wrote: > > Attempting to use a Delta 1010 as a switcher. Anyone able to get it to work? > I can't seem to switch from any source other than 1. It won't remove 1 to > play anything from Aux 1 log or any other input. > > Using ST 0 1 1! to add Input 1 and SR 0 1 1! to remove 1 to play something > from Aux 1 log. I also tried ST 0 2 1! to just switch sources in general > with no result. Any thoughts? > > > >> On Tue, Jul 26, 2016 at 8:02 AM, Frank White >> <[email protected]> wrote: >> I found my issue. For some reason, probably my mistake, the last channel on >> the 4 channel card will not work. But the 3rd channel works great. So now >> we can replace any commercial we need to from airing over the stream. Works >> great every time I have tested it. Thanks! >> >> Frank White >> >> >> On Monday, July 25, 2016, Rob Landry <[email protected]> wrote: >> > >> > Wow. Who knew? >> > >> > >> > Rob >> > >> > -- >> > Я там, где ребята толковые, >> > Я там, где плакаты "Вперёд", >> > Где песни рабочие новые >> > Страна трудовая поёт. >> > >> > On Mon, 25 Jul 2016, Fred Gleason wrote: >> > >> >> On Jul 25, 2016, at 07:13, Rob Landry <[email protected]> wrote: >> >> You're using a sound card as an audio switch? I didn't think >> >> Rivendell was capable of addressing ASI cards that way; my >> >> understanding is he inputs and outputs are defined for the >> >> various RD programs in rdadmin and they can't be changed on the >> >> fly using RML commands, as you are trying to do. >> >> >> >> >> >> You sure can! Just add a ‘Local Audio Adapter’ switcher in >> >> RDAdmin->ManageHosts->Switchers/GPIO and set the ‘Card’, ‘Inputs’ and >> >> ‘Outputs’ parameters accordingly. This works for all classes of audio >> >> device (AudioScience, ALSA and JACK). See the ‘Local Audio Adapter’ >> >> section >> >> in ‘SWITCHERS.txt’: >> >> >> >> https://github.com/ElvishArtisan/rivendell/blob/stable/docs/SWITCHERS.txt >> >> >> >> Cheers! >> >> >> >> >> >> |----------------------------------------------------------------------| >> >> | Frederick F. Gleason, Jr. | Chief Developer | >> >> | | Paravel Systems | >> >> |----------------------------------------------------------------------| >> >> | A room without books is like a body without a soul. | >> >> | -- Cicero | >> >> |----------------------------------------------------------------------| >> >> >> >> >> > >> >> -- >> Frank White >> Frank White Technology >> >> _______________________________________________ >> Rivendell-dev mailing list >> [email protected] >> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev > > _______________________________________________ > Rivendell-dev mailing list > [email protected] > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
_______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
