Ok, tried that set 4 macro carts with the commands I want issued (which right now are all LB Test!)
Set my rd.ini on my windows machine to ipaddress:EX macrocart#! and still nothing, I don't see anything in /var/logs/messages either (if i do a rmlsend localhost EX macrocart#! from the playout machine it works and I see it logged) Matthew A. Chambers, NR0Q President, Wright County Outlaws ARC On Mon, Oct 31, 2016 at 5:55 PM, Lorne Tyndale <[email protected]> wrote: > Matthew, > > Last time I used RDSoftkeys to do something like you are trying to do, I > ended up putting the macro in a macro cart, and then just fired the > macro cart # from the rdsoftkey. > > Worked well for me, and then when I wanted to change that macro I didn't > have to edit rd.conf - just edited the macro cart itself. > > I found that easier then trying too fire the macro from the softkey > itself. > > Lorne Tyndale > > > -------- Original Message -------- > > Subject: [RDD] RML Send and RD Softkey > > From: Matthew Chambers <[email protected]> > > Date: Mon, October 31, 2016 4:57 pm > > To: User discussion about the Rivendell Radio Automation System > > <[email protected]> > > > > > > I was trying to set up RML Softkey to remotely control my main studio > > playout machine to switch between LiveAssist and Auto and to PN (Play > Next) > > from my windows laptop for a live remote I'm doing in the station parking > > lot with a wireless mic. I'm sitting here in the studio sending test RML > > commands from RML Send and RML Softkey to print a message in RDAirplay > for > > testing and it's not working > > > > [SoftKeys] > > ; > > ; This section can be used to program the RDSoftKeys applet, or you > > ; can use the --map-file=<filename> switch to configure multiple soft > > ; key setups on the same host. > > > > Columns=4 > > > > Command1=kele-air.kele.local:LC\ darkRed\ Remote\ Control! > > Legend1=Remote Control > > Color1=blue > > > > Command2=10.0.0.108:PM\ 1! > > Legend2=Live Assist > > Color2=yellow > > > > Command3=10.0.0.108:PM\ 2! > > Legend3=Auto > > Color3=green > > > > Command4=10.0.0.108:PM\ 3! > > Legend4=Manual > > Color4=red > > > > Command5=10.0.0.108:PN\ 0! > > Legend5=Play Next > > Color5=green > > > > I tried just sending the RML from RMLsend and nothing is happening in > > RDAirplay > > > > Matthew A. Chambers, NR0Q > > > > President, Wright County Outlaws ARC<hr>_______________________ > ________________________ > > Rivendell-dev mailing list > > [email protected] > > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev >
_______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
