Hay Steve this may be a better way to build
I have had a few problems with doing the install below but with the rhel6 I
got a semi working system the biggest problem being sound card drivers rhel
7 dosent support older network drivers and if you try in install drivers
manually the install over writes them it's the same with some sound card and
it makes them do strange things
Ive also found that installing the ./install_rivendell.sh -standalone
Part will only install if you are in command line mode 3
And the | from the password bit doesn't need to be there in the rhel7
instructions
echo "SET PASSWORD FOR root@host = PASSWORD('pwd');" | mysql -u root
echo "SET PASSWORD FOR root@localhost = PASSWORD('pwd');" | mysql -u root
http://static.paravelsystems.com/rivendell-install/rivendell-install-rhel6.h
tml
http://static.paravelsystems.com/rivendell-install/rivendell-install-rhel7.h
tml
From: [email protected]
[mailto:[email protected]] On Behalf Of Steve
Varholy
Sent: 04 December 2016 02:24
To: Cowboy <[email protected]>; [email protected]
Subject: Re: [RDD] Interesting Issue with the Current Appliance Installation
Apparently it tests for a 300GB drive for the full appliance install and
that is why it is failing.
I'm going to use it to play/fire off affiliate station ID's on GPIO closure,
so it doesn't need to store a lot of audio.
Looks like instead of shortcutting it with the appliance, I'll have to build
my own.
Steve Varholy
President and General Manager
The Historic Barringer Building
1338 Main Street - Suite 202
Columbia, South Carolina 29201
Office: (803) 753-7260 x 251
Direct: (803) 404-5535
Cell: (703) 585-2101
A Service of the Independent Media Foundation
_____
From: [email protected]
<mailto:[email protected]>
<[email protected]
<mailto:[email protected]> > on behalf of
Cowboy <[email protected] <mailto:[email protected]> >
Sent: Saturday, December 3, 2016 9:18:13 PM
To: [email protected]
<mailto:[email protected]>
Subject: Re: [RDD] Interesting Issue with the Current Appliance Installation
On Saturday 03 December 2016 08:12:42 pm Steve Varholy wrote:
> Any ideas how I can force the full standalone install.
You choose the basic disks with a custom layout, which the
way you do that changes with every CentOS release.
Far from intuitive. Usually takes me three or four attempts
each time to get it to something that works.
--
Cowboy
_______________________________________________
Rivendell-dev mailing list
[email protected]
<mailto:[email protected]>
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
