I did move them down and hit save. Rivendell still does see them. Sent from my iPhone
On Dec 10, 2016, at 1:38 PM, John Anderson <[email protected]<mailto:[email protected]>> wrote: Steve.... the cards in the top window are "available", the ones in the bottom window are in use in rivendell.... so you must move the one you want, to the lower part of the window and save... if centos sees it, rivendell can't.. if rivendell is using it, it will not play in centos... . On Saturday, December 10, 2016 12:20 AM, Steve Varholy <[email protected]<mailto:[email protected]>> wrote: rdalsaconfig is showing both onboard sound cards - like it did as originally installed. However rdadmin/manage hosts/audio resources reports no cards present. Centos is seeing the onboard card and plays sounds through it outside of Rivendell. So, I am pretty much still stuck. Any suggestions? Steve Varholy President and General Manager [1478183502168_WXRY_Full_993_300x145.png] The Historic Barringer Building 1338 Main Street - Suite 202 Columbia, South Carolina 29201 Office: (803) 753-7260 x 251 Direct: (803) 404-5535 Cell: (703) 585-2101 A Service of the Independent Media Foundation ________________________________ From: [email protected]<mailto:[email protected]> <[email protected]<mailto:[email protected]>> on behalf of Robert Jeffares <[email protected]<mailto:[email protected]>> Sent: Saturday, December 10, 2016 12:10:56 AM To: [email protected]<mailto:[email protected]> Subject: Re: [RDD] Appliance Issue I have noticed that storing alsamixer settings requires specifying the card # alsactrl store [0,1,2] so they come back on reboot. I note too that sometimes I had to create the directory they were stored in. I am away from base at the moment, so don't have access to my notes. The store *has* to be done as root regards Robert On 09/12/16 22:12, Andy Higginson wrote: > ---- On Fri, 09 Dec 2016 00:09:45 +0000 Steve Varholy > <[email protected]<mailto:[email protected]>> wrote ---- > > Would the upgrade/update of the appliance changed that? > > There has been some kind of change in the ALSA setup on Centos 6 that has > come between the version on the Appliance DVD (Centos 6.6?) and the current > fully updated version (Centos 6.8). I don't know how much of a change there > is, but there are some extra things that you need to do to the Alsamixer > setup to get it to keep the settings over a reboot. I don't know if this is > totally off the rails or if this is a clue. > > Andy > > > _______________________________________________ > Rivendell-dev mailing list > [email protected]<mailto:[email protected]> > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev _______________________________________________ Rivendell-dev mailing list [email protected]<mailto:[email protected]> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev _______________________________________________ Rivendell-dev mailing list [email protected]<mailto:[email protected]> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
_______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
