Hi,
rmlsend is a command line utility to run macros on any Rivendell
computer (--to-host to change machines or leave it for localhost), if
you are using macro carts you don't need rmlsend.
The \ is a command line problem, you can't use ! in most linux shells as
it is a special character so \! means this is a literal ! and not a
special !.
On 18/01/17 14:33, Steve Varholy wrote:
Wayne:
Thank you.
In the macro cart must I prepend rmlsend to the macro command as per
your example below?
rmlsend PP S1 1 1\!
What does the \ do? I didn't see that in the txt file in /docs.
*Steve Varholy*
President and General Manager
1478183502168_WXRY_Full_993_300x145.png
The Historic Barringer Building
1338 Main Street - Suite 202
Columbia, South Carolina 29201
Office: (803) 753-7260 x 251
Direct: (803) 404-5535
Cell: (703) 585-2101
A Service of the Independent Media Foundation
------------------------------------------------------------------------
*From:* [email protected]
<[email protected]> on behalf of Wayne
Merricks <[email protected]>
*Sent:* Wednesday, January 18, 2017 7:34:35 AM
*To:* [email protected]
*Subject:* Re: [RDD] Macro Help
Hi,
You might be getting hit by case sensitivity. Try this:
rmlsend PP S1 1 1\!
The broadcast tools stuff tends to have dip switches where you can
change the modes, you might have to change it to pull down or pull up
(basically the reverse of what it is now).
There are no notes that say you need to do anything special for the
GPI-16 in the switchers.txt file so it should just work.
https://github.com/ElvishArtisan/rivendell/blob/master/docs/SWITCHERS.txt
rivendell/SWITCHERS.txt at master ยท ElvishArtisan ...
<https://github.com/ElvishArtisan/rivendell/blob/master/docs/SWITCHERS.txt>
github.com
rivendell - A full-featured radio automation system targeted for use
in professional broadcast environments
Regards,
Wayne
On 18/01/17 04:18, Steve Varholy wrote:
I think I've fallen into one of the gaps of documentation.
I've got the appliance installation running on HP Compaq Desktop PC
8000 Elite Core 2 Duo E8400 (3.00 GHz).
I've got an external USB sound card. Works great.
I've also got a Broadcast Tools GPI-16+ connected via USB. I've got
it working. The Rivendell GPI monitor thinks the GPI contact is ON
all the time even though it is not - triggering it causes the GPI
monitor to report it as "off" and then it goes back to "on." That's
not my immediate issue.
The real issue I am having is setting up RDCatch to watch for a
closure and then play a specific cart on the soundpanel.
I've set up a macro cart with the following line in it PP s1 1 1!
then gone into Admin/Manage Hosts to have the GPI closure on fire the
macro cart. (Play Row 1/Column 1 in Soundpanel S1)
It doesn't work.
Going in RDLibrary and running the line in the macro cart (or the
whole Macro Cart) doesn't do anything.
I'm at a loss to try to figure out what is not set right - and
there's still scant documentation to be able to figure it out myself.
Any clues where I should start?
*Steve Varholy*
President and General Manager
1478183502168_WXRY_Full_993_300x145.png
The Historic Barringer Building
1338 Main Street - Suite 202
Columbia, South Carolina 29201
Office: (803) 753-7260 x 251
Direct: (803) 404-5535
Cell: (703) 585-2101
A Service of the Independent Media Foundation
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
