Hmm, It looks like caed cannot start jackd. I've tried it with -r
(realtime) and without. BUt in both cases i get:
Oct 23 15:21:03 rdclient-daw systemd[1]: Started Rivendell Radio
Automation caed Service.
Oct 23 15:21:04 rdclient-daw caed[1833]: JACK server started
Oct 23 15:21:04 rdclient-daw caed[1833]: unable to communicate with JACK
server
Oct 23 15:21:04 rdclient-daw caed[1833]: JACK general failure
Oct 23 15:21:04 rdclient-daw caed[1833]: no connection to JACK server
Oct 23 15:21:05 rdclient-daw caed[1833]: Found TwoLAME encoder library,
MPEG L2 encoding supported
Oct 23 15:21:05 rdclient-daw caed[1833]: Found MAD decoder library, MPEG
L2 decoding supported
Oct 23 15:21:05 rdclient-daw caed[1833]: Unable to set realtime
scheduling: Operation not permitted
Oct 23 15:21:05 rdclient-daw caed[1833]: cae started
But when i manualy ran jackd (qjackctl) an make a reload caed..:
Oct 23 15:24:26 rdclient-daw systemd[1]: Started Rivendell Radio
Automation caed Service.
Oct 23 15:24:26 rdclient-daw caed[2044]: JACK server started
Oct 23 15:24:26 rdclient-daw caed[2044]: connected to JACK server
Oct 23 15:24:27 rdclient-daw caed[2044]: Found TwoLAME encoder library,
MPEG L2 encoding supported
Oct 23 15:24:27 rdclient-daw caed[2044]: Found MAD decoder library, MPEG
L2 decoding supported
Oct 23 15:24:27 rdclient-daw caed[2044]: Unable to set realtime
scheduling: Invalid argument
Oct 23 15:24:27 rdclient-daw caed[2044]: cae started
What does that mean: "Unable to set realtime scheduling: Invalid
argument"
[Tuning]
; This section defines the realtime parameters used when running
; audio components. Normally, these are useful only for debugging.
UseRealtime=Yes
RealtimePriority=9
If set to No, the message above disappears...:)
Am 23.10.2017 14:45, schrieb Mark Stennett:
RRR, thanks.
FROM: <[email protected]> on behalf of
"Schwoon, newsletter" <[email protected]>
DATE: Monday, October 23, 2017 at 4:58 AM
TO: <[email protected]>
SUBJECT: Re: [RDD] Lubuntu Live CD
Good morning from germany..
Your right Tim. The would be the best way. But the jack document inside
the source dir is outdated.
I've enabled the "start JACK Server" in Jack settings and copied the run
command from the Messages window from qjackctl.
/usr/bin/jackd -dalsa -dhw:U192k -r44100 -p1024 -n2
But that seems not to start jackd when i reload caed... service. What to
fill in the Jack clients command line.? Why do i need to use a macro
card.?
Am 22.10.2017 22:03, schrieb Tim Camp:
Greetings,
Best way is to use the Jack settings in RdAdmin, you can put your jackd
start command there and it will start jack first with any rivendell
module is started, you can also set up a macro cart as your start-up
cart for your host and it will make all your default connections.
Cheers
Tim Camp
On Sun, Oct 22, 2017 at 1:54 PM, Schwoon, newsletter
<[email protected]> wrote:
Hi
I've seen you have installed qjackctl.
On my Debian8 i use three systemd services to run caed,ripcd and
rdcatchd with the user "rduser" at startup. But to run jackd before,
i've to kill them after systemstart. Do you know a way to insert a "wait
for jackd" in the caed service.?
Atached the service files.
On most of my machines i like to use jack for audiorouting...
Am 22.10.2017 20:37, schrieb Tim Camp:
Greetings,
Understand, just wanted to have the audio science drivers in there for
anyone who needs them.
I compiled qt3 from source
Cheers
Tim Camp
WZEW FM
On Oct 22, 2017 1:31 PM, "Schwoon, newsletter" <[email protected]>
wrote:
Hi
I don't have such soundcart equipment. :) Using mostly simple USB
Soundcards from Behringer. (UMC204HD)
BTW ... Where did you get the QT3 stuff from.? Or is that still
available on 14.04. On Deb8 i've to use the repo from
http://debian.tryphon.eu/
Am 22.10.2017 20:00, schrieb Tim Camp:
Greetings
Thanks, yes this is a live copy of my development system so everything
is there to compile next release. Would be only necessary to do .
/configure --sysconfdir= /etc/apache2/available_conf
I will be updating the iso later today with hpi included.
Cheers
Tim Camp
WZEW FM
On Oct 22, 2017 12:28 PM, "Schwoon, newsletter"
<[email protected]> wrote:
Very good work. I've done this based on Debian 8. And made the image
with Systemback, too. :)
I think, it shoud be possible to compile the next release with this
commands from inside the source DIR..?! Assuming the path to the libexec
is the same...
autogen.sh
configure --disable-hpi --libexecdir=/var/www/rd-bin
make ...
Am 20.10.2017 16:24, schrieb Tim Camp:
Greetings,
I have uploaded to my website a installable live cd of Rivendell 2.17.0
on Lubuntu 14.04LTS for x86-64
I built this iso to help me do multiple installs at our stations and
just thought some of you debian/ubuntu peeps might have a use for it.
This LTS version is supported through April 2019
The iso of Lubuntu has had all the fat removed nothing but system
utilities and a few necessary packages.
I like bare bones appliances in my control rooms.
It contains a fully operating Rivendell 2.17.0 install compiled from
source.
One caveat no-hpi, I'll upload one that includes that in a few days.
I've got a little tinkering to do with the hpklinux.
For live testing with a cd
username is rduser
pw is rivendell
to run Rivendell from the cd you will have to start mysql
sudo service mysql start
If you wish to install you must run install from the boot splash, not
inside the live version.
Here is the link
http://dotcom1.net/rivendell/Lubuntu-Rivendell-2.17.0-Live.iso
MD5 check sum at http://dotcom1.net/rivendell/MD5
I'll also post a 16.04 version when I get finished with it.
Cheers
Tim Camp
WZEW-FM WNSP-FM
Mobile, Al.
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
--
Tim Camp
Director of Operations/Programming
Dot Com Plus L.L.C.
dbs WZEW-FM WNSP-FM
Mobile, Al.
_______________________________________________ Rivendell-dev mailing
list [email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
