Hi Patrick,
Whenever I have to interface the serial world with the GPIO world I reach
for a device from Broadcast Tools. Though I haven't used these with RD, one
of these should do the trick. Check out their site:
http://broadcasttools.com/product-category/usb-serial-gpi-gpio/
Thanks,
Kevin
-----Original Message-----
From: Patrick
Sent: Monday, January 22, 2018 6:22 PM
To: Rivendell-Dev
Subject: [RDD] Need Hardware Genius - Serial Port GPIO and Auditronics
200Console
I am hoping someone can help me figure out how to use the serial port as
GPIO so our Auditronics 200 console will start Rivendell when an SLI module
is turned on. While I enjoy providing software updates to the project, I am
not a hardware person. I've attached the manual page for the Logic Control
(Option 4) and a schematic of the SLI board. What I'm trying to do is have
one of the serial control lines go high when a module is turned on.
If this cannot be done with a serial port (or game port), would someone
recommend a low-cost alternative?
—
Patrick
[email protected]
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
