Hi List.
This weekend I've managed to setup a Head/National/main-terminal +
Local/Regional/traffic-terminal lab .... So far, so good, it works and
I'm very happy, I'm learning a lot of this world! ... now but, comes the
issue:
Since I don't have physical stuff, including an audio switcher (I'm
using everything software: jack interface, Local Audio Switcher on Jack
interface, audio sharing through jacktrip, and commands between head and
terminal using essentially RML CC ... but, surprisingly, this all works
very very well!!! I'm thinking that a fully virtualized radio network
could be very much possible) my switcher is Rivendell Jackd interface as
Local Audio Adapter. Here SA and SR macros do work. They're in fact the
foundation of my setup: I can use SA/SR to program relaying audio from
header or play local stuff instead.
My problem is that while SA does work, SX seems to not (or I'm failing
completely somewhere). Ideally, What I would like is to be able to use
SA to gradually (some seconds fading-up) return back to head/master
audio content after a local traffic-break. I know this is not possible
out-of-the-box, but I feel I could fake that using SX (or SL?) ... but
they seem to not apply to my Jackd interface (Interface number 1)
crosspoints. Here's a sample commands
- This works: switch from content coming from master (in enters in
rivendell's jackd input 7L/R, so, input 8 on the switcher) and the
removal/reverse command
SA 1 8 1
SR 1 8 1
- And this are my attempts on trying to control the crosspoint gain
after SA it:
SX 1 8 1 -40! (try to set the crosspoint to -40 dBFs)
SX 1 8 1 0! (try to set it to 0)
Is that the way SX is intended to be used? wrong syntax on my own? Has
anyone tried this or something similar?
Thanks, regards.
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
