--- Begin Message ---
The md5sum checked out ok.  below is the output from the console when i 
tried to burn with a nero tested cd.

Cdrecord 1.9 (i686-pc-linux-gnu).....
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.20
Using libscg version 'schily-0.1'
atapi: 1
Device type: Removable CD-ROM
Version: 0
Response Format: 1
Vender_info: 'HP    '
Identifikation: 'CD-Writer+ 8290  '
Revision: '1.3C'
Device seems to be: Generic mmc CD-RW
Using generic SCSI-3/mmc CD-R driver (mmc_cdr)
Driver flags: SWABAUDIO
Driver buf size: 1343488 = 1312 KB
FIFO size: 4194304 = 4096 KB
Track 01: data 505 MB
Total size: 580 MB (57:28.60) = 258645 sectors
Lout start: 580 MB (57:28.60) = 258645 sectors
Current size: 2048
ATIP info from disk:
    Indicated writing power: 4
    Is not unrestricted
    Is not erasable
    Disk sub type: Medium type A, low beta catagory (A-) (2)
    ATIP start of lead in:  -12508 (97:15/17)
    ATIP start of lead out:  359849 (79:59/74)
Disk type:  Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359849 Blocks current:  359849 Blocks remaining:  101204
Starting to write CD/DVD at speed 4 iin write mode for single session
Last chance to quit......
Waiting for reader process to fill input buffer ... input buffer ready
Performing OPC...
Starting new track at sector: 0
Track 01:  0 of 505 MB written.cdrecord: Input/output error.  write_g1: 
scsi sendcmd:  retryable error
CDB: 2A 00 00 00 00 9B 00 001F 00
status: 0x0 (GOOD STATUS)

write track data:  error after 317440 bytes
Sense bytes:  70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing time:  10.251s
Fixating...
Fixating time:  66.014s
cdrecord:  fifo had 69 puts and 6 gets
cdrecord:  fifo was 0 times empty and 2 times full, min fill was 95%


I have no idea what all that means.

Tracey


JL Boers wrote:

> See the FAQ at linuxsoftworks.org . (Yes, we have one of those :)
>
> http://www.linuxsoftworks.org/faq.php?myfaq=yes&id_cat=1&categories=CD+Burning 
>
>
> Item 1 is for the command line method. Also run an md5sum on it.
>
> JL
>
> Tracey wrote:
>
>> I just finnished downloading the r44 iso and have been trying to burn 
>> it with no luck.  koncd keeps telling me that my cd's are corrupt and 
>> and error 254.
>>
>> I put the same cd's on my winMe box and nero claims that they are 
>> fine (they are also empty).  I've tried 5 different cd's and koncd 
>> says the same thing for all of them.  any ideas?
>>
>> Tracey
>>
>
>
>



--- End Message ---

Reply via email to