Buna,
Am ceva probleme cu un controller HPT372 pe o placa de baza Epox
8KRA2+. Am placa de mai mult timp, dar pana acum n-am folosit
controllerul IDE RAID aflat pe ea. Chiar si acum as dori sa folosesc ca
simplu controller IDE, nu pentru RAID. Configuratia mea e:
IDE0: hard disc
IDE1: DVD writer si CD writer
IDE2 (HPT372): DVD reader
IDE3 (HPT372): nimic
Problema e ca daca folosesc accessul DMA pentru DVD reader (suporat
UDMA33), primul access la DVD este foarte lent cu o multime de erori
DMA, dupa care merge, dar cred ca foloseste un mod PIO, nu DMA.
La bootare mesajele mai importante sunt:
Kernel command line: root=/dev/hda6 selinux=0 splash=silent
resume=/dev/hda9 vga=0x31a ide2=autotune ide2=d
ma ide2=reset ide3=noprobe
[...]
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: MAXTOR 6L040J2, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
input: PS2++ Logitech Wheel Mouse on isa0060/serio1
hdc: TSSTcorpCD/DVDW TS-H552U, ATAPI CD/DVD-ROM drive
hdd: PLEXTOR CD-R PX-W2410A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63,
UDMA(133)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 >
hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33)
[...]
HPT372: IDE controller at PCI slot 0000:00:0e.0
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 11 (level, low) -> IRQ 11
HPT372: chipset revision 5
HPT37X: using 33MHz PCI clock
HPT372: 100% native mode on irq 11
ide2: BM-DMA at 0xe700-0xe707, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xe708-0xe70f, BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
USB Universal Host Controller Interface driver v2.2
ieee1394: Initialized config rom entry `ip1394'
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
Linux agpgart interface v0.100 (c) Dave Jones
hde: JLMS XJ-HD163, ATAPI CD/DVD-ROM drive
ide2 at 0xe300-0xe307,0xe402 on irq 11
hde: ATAPI 48X DVD-ROM drive, 512kB Cache
Deci DMA este off, aici, chiar daca am dat ide2=dma.
Dupa "hdparm -d 1 /dev/hde" la urmatorul access mesajul de eroare:
ide-cd: cmd 0x28 timed out
hde: DMA timeout retry
hde: timeout waiting for DMA
hde: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hde: drive not ready for command
hde: ATAPI reset complete
ide-cd: cmd 0x28 timed out
hde: DMA timeout retry
hde: timeout waiting for DMA
hde: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hde: drive not ready for command
hde: ATAPI reset complete
IRQ11 nu e shared, dar nu ma ajuta nici daca folosesc "acpi=off" si
setez USB-ul in bios la "disabled".
Aveti vre-o idee? Am incercat google-ul, si desi erau probleme similare,
rapoartele erau mai ales pentru kernele mai vechi si nu am gasit
raspunsul.
Eu am SuSE 9.3 cu 2.6.11.4-21.8-default.
Andras
--
Quanta Plus developer - http://quanta.kdewebdev.org
K Desktop Environment - http://www.kde.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url :
http://lists.lug.ro/pipermail/rlug/attachments/20050908/6fe3f347/attachment.pgp
From dazzle.digital at gmail.com Thu Sep 8 13:51:15 2005
From: dazzle.digital at gmail.com (Dazzle)
Date: Thu Sep 8 13:51:23 2005
Subject: [rlug] Apache IP Spoofing
In-Reply-To: <[EMAIL PROTECTED]>
References: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
Salutare,
M-am izbit de o problema... mi s-a cerut sa fac ceva de genul
http://scripts.e-web.net/mask/ si google nu m-a ajutat deloc azi...
presupun ca se poate face cu iptables toata smecheria... dar nu am
nici cea mai vaga idee de unde sa incep... imi mai trebuie vreun patch
cumva? Un link cu ceva documentatie pentru asta? As aprecia foarte
mult orice idee cat de mica ar fi ea. Si nu spuneti sa cumpar solutia
dupa site-ul de mai sus ca baietii sunt de negasit...
PS: scuze daca a venit mesajul de mai multe ori dar dupa ~15min eu tot
nu am primit copia mea...
O zi buna,
--
Dazzle
Phone: +40741226993
Yahoo: liviudm_cisco
GTalk: [EMAIL PROTECTED]
URL: http://dazzle.xhost.ro
