On 10/13/05, Radu Radoveneanu <[EMAIL PROTECTED]> wrote:
> ar merge cu static routes
Asta m-am gandit si eu si am incercat numai ca nu prea ma prind cum ar
trebui facuta toata treaba... momentan am reusit sa fac asta:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
85.x.x.0 85.x.x.1 255.255.255.0 UG 0 0 0 eth0
86.x.x.0 * 255.255.254.0 U 0 0 0 eth0
link-local * 255.255.0.0 U 0 0 0 eth0
10.0.0.0 * 255.224.0.0 U 0 0 0 eth0
loopback * 255.0.0.0 U 0 0 0 lo
default 86.x.x.1 0.0.0.0 UG 0 0 0 eth0
86.x.x.45 - eth0
85.x.x.45 - eth0:anet
liviudm:~ # ip route get to 85.x.x.x
85.x.x.x via 85.x.x.1 dev eth0 src 85.x.x.45
cache mtu 1500 advmss 1460 fragtimeout 64
liviudm:~ # ip route get to 100.0.0.0
100.0.0.0 via 86.x.x.1 dev eth0 src 86.x.x.45
cache mtu 1500 advmss 1460 fragtimeout 64
Vreo sfat cum as putea sa fac sa-mi iasa traficu' prin amandoua? Sau
sa imi iasa traficul pe portul x pe conexiunea x si traficul pe portul
y pe conexiunea y? E posibil macar sau caut degeaba?
--
Damian Mihai Liviu
Phone: +40741226993
Yahoo: liviudm_cisco
URL: http://liviudm.blogspot.com
_______________________________________________
RLUG mailing list
[email protected]
http://lists.lug.ro/mailman/listinfo/rlug
