Alex wrote:
Nota: Softul cu care vine ups-ul (powerchute) este complet outdated si nu am
ce sa fac cu el pe un RHEL4, deci sigur va trebui sa folosesc nut-ul. Am luat
de pe net si am compilat din src.rpm un nut pentru RHEL4
(nut-2.0.1-1_1.el4.at.src.rpm).
exista powerchute nou la APC pe site. n-am utilizat niciodata, nu am
idee ce si cum. stiu doar ca exista
eu de 4 ani incoace am folosit exclusiv apcupsd:
URL : http://www.apcupsd.com
Summary : APC UPS Power Control Daemon for Linux
Description :
Apcupsd can be used for controlling most APC UPSes. During a
power failure, apcupsd will inform the users about the power
failure and that a shutdown may occur. If power is not restored,
a system shutdown will follow when the battery is exausted, a
timeout (seconds) expires, or the battery runtime expires based
on internal APC calculations determined by power consumption
rates. If the power is restored before one of the above shutdown
conditions is met, apcupsd will inform users about this fact.
Some features depend on what UPS model you have (simple or smart).
_______________________________________________
RLUG mailing list
[email protected]
http://lists.lug.ro/mailman/listinfo/rlug
