Am rezolvat-o !!! intre timp.
Iata cum :
Am facut un director firmware in ./lib acolo am copiat fisierele
RADIO0d.BIN RADIO11.BIN RADIO15.BIN WLANGEN.bin ( cu WLANGEN.bin redenumit
in WLANGEN.BIN ) din directorul
dwl520+_driver_eng_3.07.Aceleasi fisiere le-am copiat si un /usr/share/acx
si in /root/ /acx100-0.2.0pre8_plus_fixes_57/firmwares.
A urmat in prealabil un make clean si un make si make install .
In final am lansat scriptul start_net si iata ce imi afiseaza :
#./start_net
using wlan0.
Module successfully inserted.
Setting rate to 11M auto.
Setting channel 1.
Going to try to join or setup ESSID network_down.
Setting mode to managed .
Setting power LED to OFF.
Waiting for association . . . 10 9 8 7 6 5 4 3 2 1 FAILED.
interface has been setup succesfully.
SIOCADDRT: Network is unreachable.
Un ifconfig wlan0 imi afiseaza:
#ifconfig wlan0
wlan0 linkencap:Ethernet HWaddr 00:03:2F:04:6B:85
inetaddr: 192.168.6.221 Bcast:192.168.6.255
Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 owners:0 frame:0
TX packets:0 errors:0 dropped:0 owners:0 carrier:0
collissions:0 txqueuelan:1000
RX bytes: (0.0 b ) TX bytes: (0.0 b )
Intrerrupt :5 Base adress:0x2040
si asta a fost.
> On Thu, 10 Nov 2005, Abibula Aygun wrote:
>
> > Aici m-am impotmolit.
> >
> > PLEASEEEEEE HEEEEEEEEEEELP
>
> Pai vezi ce modul incearca sa incarce si recompileaza kernelul.
> Daca-ti da unresolved symbol deja e cam clar.
>
_______________________________________________
RLUG mailing list
[email protected]
http://lists.lug.ro/mailman/listinfo/rlug
