Salut, E primul meu mail pe aceasta lista desi va urmaresc de foarte mult timp. Dupa mai multe incercari de a-mi gasi raspuns pe anumite forumuri mi-a ramas solutia sa incerc si aici. Se da un laptop Fujitsu Amilo 7405 si de ceva timp, in logurile smart-ului primesc un mesaj ciudat. Am asa:
smartctl -a /dev/hda smartctl version 5.34 [i686-pc-linux-gnu] Copyright (C) 2002-5 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: ST9808210A Serial Number: 3LF0H8MC Firmware Version: 3.00 User Capacity: 80,026,361,856 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Tue Dec 13 08:38:31 2005 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 48) A fatal error or unknown test error occurred while the device was executing its self-test routine and the device was unable to complete the self-test routine. Total time to complete Offline data collection: ( 426) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 046 044 034 Pre-fail Always - 168031753 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1131 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 071 060 030 Pre-fail Always - 13454277 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1032 10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 352 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 352 193 Load_Cycle_Count 0x0032 078 078 000 Old_age Always - 44868 194 Temperature_Celsius 0x0022 025 042 000 Old_age Always - 25 (Lifetime Min/Max 0/17) 195 Hardware_ECC_Recovered 0x001a 046 044 000 Old_age Always - 168031753 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Fatal or unknown error 00% 1029 - # 2 Conveyance offline Fatal or unknown error 00% 1028 - # 3 Conveyance offline Fatal or unknown error 00% 1028 - # 4 Extended offline Completed without error 00% 1022 - # 5 Short offline Completed without error 00% 1020 - # 6 Conveyance offline Fatal or unknown error 00% 1000 - # 7 Short offline Completed without error 00% 993 - # 8 Short offline Completed without error 00% 653 - # 9 Short offline Completed without error 00% 275 - #10 Extended offline Aborted by host 90% 274 - #11 Extended offline Aborted by host 90% 274 - #12 Extended offline Aborted by host 90% 274 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. smartctl -t conveyance /dev/hda smartctl version 5.34 [i686-pc-linux-gnu] Copyright (C) 2002-5 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Warning: device does not support Conveyance Self-Test functions. Sending command: "Execute SMART Conveyance self-test routine immediately in off-line mode". Command "Execute SMART Conveyance self-test routine immediately in off-line mode" failed: Input/output error Eu mai sus vad ca hdd-ul meu nu suporta acest test si totusi in logurile smart-ului primesc : # 1 Conveyance offline Fatal or unknown error 00% 1029 - # 2 Conveyance offline Fatal or unknown error 00% 1028 - # 3 Conveyance offline Fatal or unknown error 00% 1028 - si nu prea inteleg de ce.Dupa cum se vede am facut teste (short,long) si nu am nici o eroare. Am cautat cu google de mi-a venit rau...am gasit aceeasi problema tot cu un hdd Seagate care se comporta la fel dar din pacate nu am gasit si-o explicatie. Daca cineva cunoaste motivul (sau macar are o idee) il rog sa-mi raspunda si mie. Sa fie hdd-ul pe duca (eu ma indoiesc..dar mai vreau si alte pareri)? Mersi _______________________________________________ RLUG mailing list [email protected] http://lists.lug.ro/mailman/listinfo/rlug
