Ciprian P wrote:
va salut,
la o statie cu FC5 sunt 2 placi de retea
cum pot sa aflu MAC adress-ul pt eth1 ?
am tot cautat pe google dar nu am gasit nimica.
la mine dupa boot se regaseste informatia in dmesg; de asemenea si in
/var/log/messages:
Mar 13 22:05:38 wolfy kernel: Floppy drive(s): fd0 is 1.44M
Mar 13 22:05:38 wolfy kernel: FDC 0 is a post-1991 82077
Mar 13 22:05:38 wolfy kernel: 8139too Fast Ethernet driver 0.9.27
Mar 13 22:05:38 wolfy kernel: ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI
11 (level, low) -> IRQ 11
Mar 13 22:05:38 wolfy kernel: eth0: RealTek RTL8139 at 0x9000,
00:04:61:62:74:92, IRQ 11 <=====
Mar 13 22:05:38 wolfy kernel: ACPI: PCI interrupt 0000:00:04.0[A] -> GSI
12 (level, low) -> IRQ 12
Mar 13 22:05:38 wolfy kernel: ip_tables: (C) 2000-2002 Netfilter core team
Mar 13 22:05:38 wolfy kernel: eth0: link up, 100Mbps, full-duplex, lpa
0x41E1
[EMAIL PROTECTED] ~]# ip l l
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:04:61:62:74:92 brd ff:ff:ff:ff:ff:f <=============
_______________________________________________
RLUG mailing list
RLUG@lists.lug.ro
http://lists.lug.ro/mailman/listinfo/rlug
