am facut unele modificari si acum pare conectat dar tot nu pot face
trafic prin tunel:
[EMAIL PROTECTED]:~/openswan_back-up# ipsec auto --up test
104 "vulcan" #4: STATE_MAIN_I1: initiate
003 "vulcan" #4: received Vendor ID payload [Openswan (this version)
2.4.4 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
003 "vulcan" #4: received Vendor ID payload [Dead Peer Detection]
106 "vulcan" #4: STATE_MAIN_I2: sent MI2, expecting MR2
108 "vulcan" #4: STATE_MAIN_I3: sent MI3, expecting MR3
004 "vulcan" #4: STATE_MAIN_I4: ISAKMP SA established
{auth=OAKLEY_RSA_SIG cipher=oakley_3des_cbc_192 prf=oakley_md5
group=modp1536}
117 "vulcan" #5: STATE_QUICK_I1: initiate
004 "vulcan" #5: STATE_QUICK_I2: sent QI2, IPsec SA established
{ESP=>0xcb4138ed <0xeefe363b xfrm=AES_0-HMAC_SHA1 NATD=none DPD=none}
pare OK
mai mult de atat nu stiu ce sa fac orice idee este binevenita...
incearca te rog
#traceroute -i eth1 192.168.0.1
_______________________________________________
RLUG mailing list
[email protected]
http://lists.lug.ro/mailman/listinfo/rlug
