Salutari,
Acelasi lucru il pateam si eu; crezand ca am facut vreo traznaie
careia nu ii dau de cap, am ezitat sa postez problema aici; ciudat
este faptul ca, desi placa mea de baza este un nForce4 (si din cate
am citit prin Internet, ar trebui sa fie recunoscuta direct), primesc
acelasi mesaj de eroare.
Odata cu compilarea kernel-ului 2.6.16 (nu retin subversion-ul si acum
sunt in Windows), problema a disparut de la sine, in sensul ca nu imi
mai apare nici un mesaj de eroare. Ramane sa testez daca senzorii
afiseaza ceva.
Sper ca am putut fi de ajutor...
2006/7/19, lonely wolf <[EMAIL PROTECTED]>:
Am un computer cu placa de baza Intel SE7230NH1, rulind Centos 4 cu
kernel 2.6.9-34.0.2.ELsmp, care la lspci zice asa:
db2 ~ # lspci
00:00.0 Host bridge: Intel Corporation E7230 Memory Controller Hub
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 5 (rev 01)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 6 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family)
Serial ATA Storage Controller IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
(rev 01)
03:00.0 Ethernet controller: Intel Corporation 82573V Gigabit Ethernet
Controller (Copper) (rev 03)
04:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
04:05.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit
Ethernet Controller (rev 05)
Dupa actualizarea lui lm_sensors la versiunea 2.10.0, finalul lui
sensors-detect este:
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `lm85' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at 3000'
Busdriver `i2c-i801', I2C address 0x2e
Chip `SMSC EMC6D100, EMC6D101 or EMC6D102' (confidence: 7)
Driver `eeprom' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at 3000'
Busdriver `i2c-i801', I2C address 0x50
Chip `SPD EEPROM' (confidence: 8)
* Bus `SMBus I801 adapter at 3000'
Busdriver `i2c-i801', I2C address 0x52
Chip `SPD EEPROM' (confidence: 8)
Problema e ca la comanda sensors, raspunde:
# sensors
Can't access procfs/sysfs file
Unable to find i2c bus information;
For 2.6 kernels, make sure you have mounted sysfs and libsensors
was compiled with sysfs support!
For older kernels, make sure you have done 'modprobe i2c-proc'!
Evident, /proc si /sys sint la locul lor.
Din cite mi-a zis google, mesajul asta de eroare apare cind de fapt nu
vede senzorii.
Daca a reusit cineva sa vada senzorii pe o astfel de placa, il rog sa imi
spuna si mie cu ce kernel/versiune de lm-sensors/setari
tia
_______________________________________________
RLUG mailing list
[email protected]
http://lists.lug.ro/mailman/listinfo/rlug
_______________________________________________
RLUG mailing list
[email protected]
http://lists.lug.ro/mailman/listinfo/rlug
