Pe un debian sarge cind montez un memory stick nu pot folosi /dev/sda, /dev/sdb, /dev/sdc, /dev/sdd, /dev/sde sau /dev/sdf, ci abia /dev/sdg. Al doilea memory stick nu merge pe /dev/sdh ci pe /dev/sdi.
Despre /dev/sdX-urile ce nu merg gasesc din astea prin loguri: | sda: Unit Not Ready, sense: | Info fld=0xa00 (nonstd), Current 00:00: sns = 70 2 | Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00 | sda : READ CAPACITY failed. | sda : status = 1, message = 00, host = 0, driver = 08 | Info fld=0xa00 (nonstd), Current sd00:00: sns = 70 2 | Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00 | sda : block size assumed to be 512 bytes, disk size 1GB. | sda: test WP failed, assume Write Enabled | sda: I/O error: dev 08:00, sector 0 | I/O error: dev 08:00, sector 0 | unable to read partition table se repeta apoi pentru sdb, sdc, sdd si sdi (nu si pentru sde, sdf, sdh). Cine stie ce pot sa fac sa inteleg de ce nu-si ia /dev/sdX incepind de la a,b, etc? Unde sa ma uit? La alte calculatoare este OK, primul memstick merge ca si /dev/sda si-l montez ca /dev/sda1, etc. Mersi de sugesti. Mugurel P.S. A, da, pe sdh gaseste o fantoma cu sdh: sdh1 sdh2 sdh4, si un fdisk -l /dev/sdh arata bestial: | Disk /dev/sdh: 1 MB, 1474560 bytes | 1 heads, 3 sectors/track, 960 cylinders | Units = cylinders of 3 * 512 = 1536 bytes | | This doesn't look like a partition table | Probably you selected the wrong device. | | Device Boot Start End Blocks Id System | /dev/sdh1 ? 623257122 679486963 84344761 69 Unknown | Partition 1 has different physical/logical beginnings (non-Linux?): | phys=(68, 13, 10) logical=(623257121, 0, 3) | Partition 1 has different physical/logical endings: | phys=(288, 115, 43) logical=(679486962, 0, 1) | Partition 1 does not end on cylinder boundary. | /dev/sdh2 ? 567173161 1190466982 934940732+ 73 Unknown | Partition 2 has different physical/logical beginnings (non-Linux?): | phys=(371, 114, 37) logical=(567173160, 0, 2) | Partition 2 has different physical/logical endings: | phys=(366, 32, 33) logical=(1190466981, 0, 3) | Partition 2 does not end on cylinder boundary. | /dev/sdh3 ? 858 858 0 74 Unknown | Partition 3 has different physical/logical beginnings (non-Linux?): | phys=(371, 114, 37) logical=(857, 0, 3) | Partition 3 has different physical/logical endings: | phys=(372, 97, 50) logical=(857, 0, 2) | Partition 3 does not end on cylinder boundary. | /dev/sdh4 1 1145037824 1717556736 0 Empty | Partition 4 has different physical/logical beginnings (non-Linux?): | phys=(0, 0, 0) logical=(0, 0, 1) | Partition 4 has different physical/logical endings: | phys=(0, 0, 0) logical=(1145037823, 0, 3) | Partition 4 does not end on cylinder boundary. | | Partition table entries are not in disk order | Nu am nimic altceva usb conectat de altfel... _______________________________________________ RLUG mailing list [email protected] http://lists.lug.ro/mailman/listinfo/rlug
