On 10/29/06, Florin Popovici <[EMAIL PROTECTED]> wrote:
Salut,
De unde poa' sa apara diferenta inumana de "dropped" intre outputul de
la "ip l sh" si outputu de la "ifconfig" ? Restul de counteri vad ca-s
fix la fel (interfata are cablul scos momentan).
Nu cred ca mai conteaza raspunsul la intrebare, decat eventual cu scop didactic.
Ce se intamplase: aveam ~145k interrupts/second, la un trafic de
100kbit/s prin server (vezi output2), waaay too high. Intreruperile
cica erau cauzate de eth1 (vezi output3). Dupa un reboot, problema a
disparut, sistemul nu mai "vede" eth1, iar dmesgu-u zice asa:
8139too: 0000:04:09.0: Chip not responding, ignoring board
8139too: probe of 0000:04:09.0 failed with error -5
Deci, maine inlocuiesc placa :)
Have a nice monday ;)
=== begin of output2 ===
[EMAIL PROTECTED] ~]# vmstat 1
procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----
r b swpd free buff cache si so bi bo in cs us sy id wa
0 0 0 865520 32220 72244 0 0 3 13 1603 156 5 63 32 0
0 0 0 865520 32220 72244 0 0 0 0 146136 6 1 65 34 0
0 0 0 865520 32220 72244 0 0 0 0 145493 5 0 70 30 0
0 0 0 865520 32220 72244 0 0 0 0 145388 5 0 69 31 0
0 0 0 865520 32220 72244 0 0 0 48 145305 23 0 71 29 0
0 0 0 865520 32220 72244 0 0 0 0 145465 11 0 69 31 0
=== end of output2 ===
=== begin of output3 ===
[EMAIL PROTECTED] ~]# while true; do cat /proc/interrupts | grep eth1; sleep 1;
done
7: 3054444877 XT-PIC eth1
7: 3054620094 XT-PIC eth1
7: 3054805729 XT-PIC eth1
7: 3054982226 XT-PIC eth1
7: 3055160564 XT-PIC eth1
7: 3055337186 XT-PIC eth1
7: 3055504565 XT-PIC eth1
=== end of output3 ===
--
www.flo.ro
_______________________________________________
RLUG mailing list
[email protected]
http://lists.lug.ro/mailman/listinfo/rlug
