lonely wolf wrote:
exista oarece probleme cu unele arhitecturi hardware din cauza trecerii
de la /dev/hdX la /dev/sdX. cred ca te-a lovit problema asta. sau nu ai
in initrd suport pt chipsetul IDE. cred ca ai sanse mai mari de ajutor
pe freenode/#fedora (sau, in disperare, #fedora-devel) sau pe
[EMAIL PROTECTED]
Nu stiu ce sa zic, in initrd am:
echo "Loading ata_generic.ko module"
insmod /lib/ata_generic.ko
pare sa incarce modulele care trebuie.
Totusi cu CD-ul de rescue porneste ok, in dmesg apare:
<7>ata_piix 0000:00:1f.1: version 2.10ac1
<7>PCI: Setting latency timer of device 0000:00:1f.1 to 64
<6>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma
0x0001f000 irq 14
<6>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma
0x0001f008 irq 15
<6>scsi0 : ata_piix
<6>ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
<6>ata1.00: ATA-6: WDC WD800JB-00ETA0, 77.07W77, max UDMA/100
[...]
<5>scsi 0:0:0:0: Direct-Access ATA WDC WD800JB-00ET 77.0 PQ: 0
ANSI: 5
<5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 3a 00 00
<5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
<5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 3a 00 00
<5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
<6> sda: sda1 sda2
N-ar fi trebuit sa dea rateuri si asta?
--
Catalin Bucur mailto:[EMAIL PROTECTED]
NOC @ Genius Network SRL - Galati - Romania
_______________________________________________
RLUG mailing list
[email protected]
http://lists.lug.ro/mailman/listinfo/rlug
