salutare,
sunt un abonat mai nou la comunitatea rlug si m.am decis sa va cer
ajutorul in incercarea mea de a pune pe picioare un server pentru
trimiterea/ receptionarea de faxuri. folosesc o masina pe care ruleaza
CentOS 5, un modem cu chipset Intel 536 EP, solutia de server HylaFAX si
clientul WinPrintHylaFAX.
problema cu care ma confrunt este ca pot receptiona faxuri, insa nu le
pot expedia. Din ce am observat conexiunea cu faxul destinar se
intrerupe la scurta perioada de timp de la primirea tonului de fax.
Mesajul de eroare rezultat dupa intreruperea conexiunii este:
From [EMAIL PROTECTED] Fri Jun 20 13:25:47 2008
Date: Fri, 20 Jun 2008 13:25:46 +0300
To: [EMAIL PROTECTED]
Subject: facsimile job 10 to 0244XXXXXX failed
From: HylaFAX Agent <[EMAIL PROTECTED]>
Mime-Version: 1.0
Content-type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
X-MIME-Autoconverted: from Quoted-Printable to 8bit by
localhost.localdomain id m5KAPll8002301
Your job to 0244XXXXXX failed because:
---- Transcript of session follows ----
Jun 20 13:25:24.16: [ 2226]: SESSION BEGIN 000000024 402440244XXXXXX
Jun 20 13:25:24.16: [ 2226]: HylaFAX (tm) Version 4.4.4
Jun 20 13:25:24.16: [ 2226]: SEND FAX: JOB 10 DEST 0244XXXXXX COMMID
000000024 DEVICE '/dev/modem' FROM 'root <root>' USER ro
ot
Jun 20 13:25:24.16: [ 2226]: <-- [12:AT+FCLASS=1\r]
Jun 20 13:25:24.23: [ 2226]: --> [2:OK]
Jun 20 13:25:24.23: [ 2226]: DIAL 0244XXXXXX
Jun 20 13:25:24.23: [ 2226]: <-- [15:ATDT0244XXXXXX\r]
Jun 20 13:25:40.15: [ 2226]: --> [7:CONNECT]
Jun 20 13:25:42.24: [ 2226]: --> [2:OK]
Jun 20 13:25:42.24: [ 2226]: REMOTE NSF "00 00 11 80 00 8A 49 10 43 4F
4E 54 52 4F 4C 20 54 52 41 44 49 4E 47 20 00 7D 00 80
80 80 02 01 01"
Jun 20 13:25:42.24: [ 2226]: NSF remote fax equipment: Canon Laser Class
9000 Series
Jun 20 13:25:42.24: [ 2226]: NSF remote station ID: "FAX "
Jun 20 13:25:42.24: [ 2226]: <-- [9:AT+FRH=3\r]
Jun 20 13:25:42.30: [ 2226]: --> [7:CONNECT]
Jun 20 13:25:42.94: [ 2226]: --> [2:OK]
Jun 20 13:25:42.94: [ 2226]: REMOTE CSI "40244XXXXXX"
Jun 20 13:25:42.94: [ 2226]: <-- [9:AT+FRH=3\r]
Jun 20 13:25:43.00: [ 2226]: --> [7:CONNECT]
Jun 20 13:25:43.27: [ 2226]: --> [2:OK]
Jun 20 13:25:43.27: [ 2226]: REMOTE best rate 14400 bit/s
Jun 20 13:25:43.27: [ 2226]: REMOTE max A4 page width (215 mm)
Jun 20 13:25:43.27: [ 2226]: REMOTE max unlimited page length
Jun 20 13:25:43.27: [ 2226]: REMOTE best vres 15.4 line/mm
Jun 20 13:25:43.27: [ 2226]: REMOTE format support: MH, MR, MMR
Jun 20 13:25:43.27: [ 2226]: REMOTE supports T.30 Annex A, 256-byte ECM
Jun 20 13:25:43.27: [ 2226]: REMOTE best 10 ms/scanline
Jun 20 13:25:43.27: [ 2226]: USE 14400 bit/s
Jun 20 13:25:43.27: [ 2226]: USE error correction mode
Jun 20 13:25:43.27: [ 2226]: <-- [9:AT+FRS=7\r]
Jun 20 13:25:43.34: [ 2226]: --> [2:OK]
Jun 20 13:25:43.34: [ 2226]: <-- [9:AT+FTH=3\r]
Jun 20 13:25:43.41: [ 2226]: --> [7:CONNECT]
Jun 20 13:25:43.41: [ 2226]: <-- data [3]
Jun 20 13:25:43.41: [ 2226]: <-- data [2]
Jun 20 13:25:44.65: [ 2226]: --> [2:OK]
Jun 20 13:25:45.65: [ 2226]: <-- [5:ATH0\r]
Jun 20 13:25:46.20: [ 2226]: --> [2:OK]
Jun 20 13:25:46.20: [ 2226]: SESSION END
------- Unsent job status -------
Destination: 0244XXXXXX
JobID: 10
GroupID: 10
Sender: root
Mailaddr: root
CommID: 000000024
Modem: any
Submitted From: 192.168.0.13
Page Width: 0 (mm)
Page Length: 0 (mm)
Resolution: 196 (lpi)
Status:
Dialogs: 1
Dials: 0
Calls: 1
Pages: 0
TotPages: 0
Attempts: 0
Dirnum:
va stau la dispozitie cu toate informatiile dorite,
__
madalin
_______________________________________________
RLUG mailing list
[email protected]
http://lists.lug.ro/mailman/listinfo/rlug
