01 01 *Read Error Rate*
Indicates the rate of hardware read errors that occurred when
reading data from a disk surface. A non-zero value indicates a problem
with either the disk surface or read/write heads. Note that Seagate
drives often report a raw value that is very high even on new drives,
and does not thereby indicate a failure.
07 07 *Seek Error Rate*
Rate of seek errors of the magnetic heads. If there is a partial
failure in the mechanical positioning system, then seek errors will
arise. Such a failure may be due to numerous factors, such as damage to
a servo, or thermal widening of the hard disk. More seek errors
indicates a worsening condition of a disk’s surface or the mechanical
subsystem, or both. Note that Seagate drives often report a raw value
that is very high, even on new drives, and this does not normally
indicate a failure.
A se nota fazele cu "Seagate drives often report a raw value that is
very high even on new drives, and does not thereby indicate a failure".
Flower "dacă n-ar fi așa ieftine chinezăriile astea..."
_______________________________________________
RLUG mailing list
[email protected]
http://lists.lug.ro/mailman/listinfo/rlug
