Bazy wrote: > On Wed, Oct 28, 2009 at 12:57 AM, Radu Dragomir <[email protected]> wrote: > >> Bazy wrote: >> >>> On Wed, Oct 28, 2009 at 12:24 AM, Radu Dragomir <[email protected]> wrote: >>> >>> >>>> Radu Dragomir wrote: >>>> >>>> >>>>> Radu Dragomir wrote: >>>>> >>>>> >>>>> >>>>>> De ceva vreme imi prind urechile intr-o problema. Si anume: >>>>>> Pe un router linux fara nici un traffic shaper totul merge pefect pe >>>>>> upload. >>>>>> In schimb, la download ... nu sare nici nu politia de 512KBps (nu e >>>>>> limita pusa de la ISP ... am verificat deja ... e totul ok din partea >>>>>> lor). (deci cam 5Mbps) >>>>>> >>>>>> Pur si simplu nu stiu unde sa ma mai uit. >>>>>> >>>>>> >>>>>> Viteza normala ar fi undeva la 10Mbps >>>>>> >>>>>> Are cineva vreo idee ? >>>>>> >>>>>> _______________________________________________ >>>>>> RLUG mailing list >>>>>> [email protected] >>>>>> http://lists.lug.ro/mailman/listinfo/rlug >>>>>> >>>>>> >>>>>> >>>>>> >>>>> Pentru orice eventualitate e aici o lista cu ce e setat in >>>>> /proc/sys/net/ipv4 >>>>> >>>>> cipso_cache_bucket_size 10 >>>>> cipso_cache_enable 1 >>>>> cipso_rbm_optfmt 0 >>>>> cipso_rbm_strictvalid 1 >>>>> conf icmp_echo_ignore_all 0 >>>>> icmp_echo_ignore_broadcasts 1 >>>>> icmp_errors_use_inbound_ifaddr 0 >>>>> icmp_ignore_bogus_error_responses 1 >>>>> icmp_ratelimit 1000 >>>>> icmp_ratemask 6168 >>>>> igmp_max_memberships 20 >>>>> igmp_max_msf 10 >>>>> inet_peer_gc_maxtime 120 >>>>> inet_peer_gc_mintime 10 >>>>> inet_peer_maxttl 600 >>>>> inet_peer_minttl 120 >>>>> inet_peer_threshold 65664 >>>>> ip_default_ttl 64 >>>>> ip_dynaddr 0 >>>>> ip_forward 1 >>>>> ipfrag_high_thresh 262144 >>>>> ipfrag_low_thresh 196608 >>>>> ipfrag_max_dist 64 >>>>> ipfrag_secret_interval 600 >>>>> ipfrag_time 30 >>>>> ip_local_port_range 32768 61000 >>>>> ip_nonlocal_bind 0 >>>>> ip_no_pmtu_disc 0 >>>>> neigh netfilter route tcp_abc 0 >>>>> tcp_abort_on_overflow 0 >>>>> tcp_adv_win_scale 2 >>>>> tcp_allowed_congestion_control cubic reno >>>>> tcp_app_win 31 >>>>> tcp_available_congestion_control cubic reno >>>>> tcp_base_mss 512 >>>>> tcp_congestion_control cubic >>>>> tcp_dma_copybreak 4096 >>>>> tcp_dsack 1 >>>>> tcp_ecn 0 >>>>> tcp_fack 1 >>>>> tcp_fin_timeout 30 >>>>> tcp_frto 2 >>>>> tcp_frto_response 0 >>>>> tcp_keepalive_intvl 75 >>>>> tcp_keepalive_probes 9 >>>>> tcp_keepalive_time 1800 >>>>> tcp_low_latency 0 >>>>> tcp_max_orphans 65536 >>>>> tcp_max_ssthresh 0 >>>>> tcp_max_syn_backlog 2048 >>>>> tcp_max_tw_buckets 180000 >>>>> tcp_mem 187296 249728 374592 >>>>> tcp_moderate_rcvbuf 1 >>>>> tcp_mtu_probing 0 >>>>> tcp_no_metrics_save 0 >>>>> tcp_orphan_retries 0 >>>>> tcp_reordering 3 >>>>> tcp_retrans_collapse 1 >>>>> tcp_retries1 3 >>>>> tcp_retries2 15 >>>>> tcp_rfc1337 0 >>>>> tcp_rmem 4096 87380 4194304 >>>>> tcp_sack 1 >>>>> tcp_slow_start_after_idle 1 >>>>> tcp_stdurg 0 >>>>> tcp_synack_retries 1 >>>>> tcp_syncookies 1 >>>>> tcp_syn_retries 5 >>>>> tcp_timestamps 1 >>>>> tcp_tso_win_divisor 3 >>>>> tcp_tw_recycle 0 >>>>> tcp_tw_reuse 0 >>>>> tcp_window_scaling 0 >>>>> tcp_wmem 4096 16384 4194304 >>>>> tcp_workaround_signed_windows 0 >>>>> udp_mem 190272 253696 380544 >>>>> udp_rmem_min 4096 >>>>> udp_wmem_min 4096 >>>>> >>>>> >>>>> Distro: >>>>> ubuntu server 9.04 (da stiu ... ubuntu nu e linux ... lol) >>>>> >>>>> uname -a >>>>> Linux 2.6.28-16-server #55-Ubuntu SMP Tue Oct 20 20:37:10 UTC 2009 >>>>> x86_64 GNU/Linux >>>>> >>>>> >>>>> lspci | grep Ethernet >>>>> 00:19.0 Ethernet controller: Intel Corporation 82566DC-2 Gigabit Network >>>>> Connection (rev 02) >>>>> 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. >>>>> RTL-8139/8139C/8139C+ (rev 10) >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> RLUG mailing list >>>>> [email protected] >>>>> http://lists.lug.ro/mailman/listinfo/rlug >>>>> >>>>> >>>>> >>>> P.S Cu intel-ul am problema. >>>> >>>> >>>> >>> In dmesg sau /var/log/syslog nu e nimic legat de placa intel? >>> "ifconfig placa intel" arata ceva la errors:0 dropped:0 overruns:0 >>> frame:0 la RX sau TX? Ai collisions:0 ? >>> >>> _______________________________________________ >>> RLUG mailing list >>> [email protected] >>> http://lists.lug.ro/mailman/listinfo/rlug >>> >>> >> ifconfig eth1 >> >> RX packets:1512 errors:0 dropped:0 overruns:0 frame:0 >> TX packets:1247 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:100 >> RX bytes:280988 (280.9 KB) TX bytes:189402 (189.4 KB) >> Memory:88380000-883a0000 >> >> dmesg | grep eth1 >> >> [ 6.914136] 0000:00:19.0: eth1: (PCI Express:2.5GB/s:Width x1) >> 00:1c:c0:30:03:94 >> [ 6.914139] 0000:00:19.0: eth1: Intel(R) PRO/1000 Network Connection >> [ 6.914164] 0000:00:19.0: eth1: MAC: 6, PHY: 6, PBA No: ffffff-0ff >> [ 10.960426] ADDRCONF(NETDEV_UP): eth1: link is not ready >> [ 12.450870] 0000:00:19.0: eth1: Link is Up 100 Mbps Full Duplex, Flow >> Control: RX/TX >> [ 12.450872] 0000:00:19.0: eth1: 10/100 speed: disabling TSO >> [ 12.451155] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready >> [ 22.550006] eth1: no IPv6 routers present >> >> >> mii-tool eth1 >> >> SIOCGMIIREG on eth1 failed: Input/output error >> SIOCGMIIREG on eth1 failed: Input/output error >> eth1: negotiated 100baseTx-FD flow-control, link ok >> >> > > Incearca un wget ftp://ftp.inode.at/speedtest2 dupa un wget > ftp://ftp.iasi.roedu.net/pub/100MB. Pune un laptop pe aceeas sârma si > da-i din nou cu wget. Daca pe laptop depaseste 512 KBytes/s si pe > masina cu Linux nu... atunci ma mai gandesc :-) > > _______________________________________________ > RLUG mailing list > [email protected] > http://lists.lug.ro/mailman/listinfo/rlug > Superb ... acum amadoua merg sub 300KBps ... unul cu ~150 (linuxul) si Leptocul cu 250+ ...
_______________________________________________ RLUG mailing list [email protected] http://lists.lug.ro/mailman/listinfo/rlug
