On 06/24/2010 11:12 AM, Florin Samareanu wrote:
> Nu trebuie pus ceva in parametrii modulului bonding?
>
am gasit:
auto bond0
iface bond0 inet manual
slaves eth3 eth4
bond_mode 802.3ad
bond_miimon 100
bond_downdelay 200
bond_updelay 200
bond_xmit_hash_policy 1 ---asta era, default e 0
> On 6/24/10, Tudor Gheorghe<[email protected]> wrote:
>
>> Salut.
>> Am un Debian 5.0.4 pe care am:
>>
>> auto bond0
>> iface bond0 inet manual
>> slaves eth3 eth4
>> bond_mode 802.3ad
>> bond_miimon 100
>> bond_downdelay 200
>> bond_updelay 200
>>
>> auto bond1
>> iface bond1 inet manual
>> slaves eth5 eth6
>> bond_mode 802.3ad
>> bond_miimon 100
>> bond_downdelay 200
>> bond_updelay 200
>>
>> masina este un bridge intre 2 cisco catalyst 3560G.
>>
>> S-au ridicat interfetele, pe cisco am "port-channel load-balance
>> src-dst-ip".
>> Ce vad eu ca nu ar fi in regula:
>>
>> dev In (kbps) In (pps) Out (kbps) Out (pps)
>> lo 0.00 0.00 0.00 0.00
>> eth3 260223.93 36606.44 430365.20 67291.09
>> eth4 307294.19 35374.26 0.00 0.00
>> eth5 283657.59 38739.11 567187.13 71982.18
>> eth6 147176.86 28552.97 0.00 0.00
>>
>> ce vine de la cisco e balansat, dar ce pleaca din debian pleaca doar pe
>> o interfata din bond, adica din bond0 pe eth3 si din bond1 pe eth5 .
>>
>> Cum as putea sa balansez loadul?
>>
>> --
>> Multumesc,
>> Teddy
>>
>> _______________________________________________
>> RLUG mailing list
>> [email protected]
>> http://lists.lug.ro/mailman/listinfo/rlug
>>
>>
>
_______________________________________________
RLUG mailing list
[email protected]
http://lists.lug.ro/mailman/listinfo/rlug
