On Thu, 2011-10-06 at 16:26 +0300, Vlad Georgescu wrote:
> On 06.10.2011 16:17, Dan Candea wrote:
> > ip ro sh via /nexthop/ | wc -l
> > mai putine procese ;)
> >
> 
> [root@gw ~]# time ip ro sh via a.b.c.d | wc -l
> 258102
> 
> real    0m3.036s
> user    0m1.905s
> sys    0m1.936s
> 
> [root@gw ~]# time ip route | grep -c ethX.Y
> 258102
> 
> real    0m3.441s
> user    0m4.718s
> sys    0m1.697s
> 
> deci progres ... mai lasati-ma bre cu numaratu' ... nu mai vreau sa numar :)
> 


Mă bag și eu ca gâgă:
Nu ma pricep la quagga, da' am una care merge. Nu primesc rute, dar
pentru puterea exercitiului i-am zis unui cisco sa-mi dea si mie niste
amarate de rută in quagga, si apoi am facut dupa cum urmeaza:

-- cut here -- 
[tbb@admin ~]$ telnet localhost 2605
Trying 127.0.0.1...
Connected to localhost. (127.0.0.1).
Escape character is '^]'.

Hello, this is Quagga (version 0.98.6).
Copyright 1996-2005 Kunihiro Ishiguro, et al.


User Access Verification

Password: 
Filters-bgpd.OpenTransfer.Com> en
Password: 
Filters-bgpd.OpenTransfer.Com# show ip bgp nei 10.254.0.1 ?
  advertised-routes  Display the routes advertised to a BGP neighbor
  dampened-routes    Display the dampened routes received from neighbor
  flap-statistics    Display flap statistics of the routes learned from
neighbor
  received           Display information received from a BGP neighbor
  received-routes    Display the received routes from neighbor
  routes             Display routes learned from neighbor
  <cr>               
Filters-bgpd.OpenTransfer.Com# show ip bgp nei 10.254.0.1 routes
BGP table version is 0, local router ID is 127.0.0.2
Status codes: s suppressed, d damped, h history, * valid, > best, i -
internal
Origin codes: i - IGP, e - EGP, ? - incomplete

   Network          Next Hop            Metric LocPrf Weight Path
*>i98.130.0.0/15    10.254.0.1               0    100      0 i

Total number of prefixes 1
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Filters-bgpd.OpenTransfer.Com# 

-- end here -- 

Ai putea sa scriptezi sa se telneteze cineva la quagga ul tau, sa scuipe
outputu la stdout si tu sa furi numa ultima linie.

Also

-- cut here -- 
Filters-bgpd.OpenTransfer.Com# show ip bgp ne 10.254.0.1
BGP neighbor is 10.254.0.1, remote AS 32392, local AS 32392, internal
link
  BGP version 4, remote router ID 10.254.0.1
  BGP state = Established, up for 07w1d14h
  Last read 00:00:54, hold time is 180, keepalive interval is 60 seconds
  Neighbor capabilities:
    Route refresh: advertised and received(old & new)
    Address family IPv4 Unicast: advertised and received
  Received 644260 messages, 0 notifications, 0 in queue
  Sent 588227 messages, 1 notifications, 0 in queue
  Route refresh request: received 0, sent 0
  Minimum time between advertisement runs is 5 seconds

 For address family: IPv4 Unicast
  Inbound soft reconfiguration allowed
  Community attribute sent to this neighbor(both)
  1 accepted prefixes
^^^^^^^^^^^^^^^^^^^^^^^^^^
  Connections established 2; dropped 1
  Last reset 07w1d16h, due to BGP Notification send
Local host: 10.18.255.169, Local port: 45928
Foreign host: 10.254.0.1, Foreign port: 179
Nexthop: 10.18.255.169
Nexthop global: fe80::230:48ff:fe63:1796
Nexthop local: ::
BGP connection: non shared network
Read thread: on  Write thread: off

Filters-bgpd.OpenTransfer.Com# 

-- end here -- 

ai putea iarasi sa scriptezi show bgp ne si sa te intereseze numai linia
cu "accepted prefixes"

Ajuta?

-- 
Tiberiu "Remote Netadmin for Hire" Ungureanu


_______________________________________________
RLUG mailing list
[email protected]
http://lists.lug.ro/mailman/listinfo/rlug

Raspunde prin e-mail lui