On Sat, 16 Sep 2000, Doom wrote: > Hello Donald / Salut R-lug, > > Sorry for bother you but I still have problems with [Subject]. > > -------------------------------------------------------------------------- > ifconfig is giving me this: > > eth3 Link encap:Ethernet HWaddr 00:60:97:10:87:9D > inet addr:192.168.35.1 Bcast:192.168.35.255 Mask:255.255.255.0 > IPX/Ethernet 802.3 addr:19770426:00609710879D > UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:786 errors:0 dropped:0 overruns:0 carrier:65 > collisions:3 txqueuelen:100 > Interrupt:7 Base address:0x300 > > I think this is OK ... > --------------------------------------------------------------------------- > cat /proc/interrupts > > CPU0 > 0: 5817093 XT-PIC timer > 1: 16477 XT-PIC keyboard > 2: 0 XT-PIC cascade > 3: 324930 XT-PIC NE2000 > 4: 2248176 XT-PIC serial > 7: 0 XT-PIC eth3 *********************************** > 8: 3 XT-PIC rtc > 9: 187044 XT-PIC eth1 > 10: 58198 XT-PIC eth0 > 11: 142856 XT-PIC ncr53c8xx > 12: 3609 XT-PIC PS/2 Mouse > 13: 1 XT-PIC fpu > 14: 47346 XT-PIC ide0 > 15: 34083 XT-PIC ide1 > NMI: 0 > > Why the CPU0 is not increasing the value over the eth3? > --------------------------------------------------------------------------- > cat /proc/ioports > > 0000-001f : dma1 > 0020-003f : pic1 > 0040-005f : timer > 0060-006f : keyboard > 0070-007f : rtc > 0080-008f : dma page reg > 00a0-00bf : pic2 > 00c0-00df : dma2 > 00f0-00ff : fpu > 0170-0177 : ide1 > 01f0-01f7 : ide0 > 0200-0203 : PC/64Xe > 02f8-02ff : serial(auto) > 0300-030f : 3c509 *************************************************** > 0340-035f : NE2000 > 0376-0376 : ide1 > 03bc-03be : parport0 > 03c0-03df : vga+ > 03f6-03f6 : ide0 > 03f8-03ff : serial(auto) > 6500-651f : eth0 > 6600-661f : eth1 > 6700-677f : ncr53c8xx > f000-f007 : ide0 > f008-f00f : ide1 > > OK? > ------------------------------------------------------------------------- > When i'm doing insmod with debug=10 ... > > [root@lcjdap ~]# insmod 3c509 debug=10 > Using /lib/modules/2.2.17/net/3c509.o > 3c509 EEPROM word 7 0x6d50. > 3c509 EEPROM word 0 0x0060. > 3c509 EEPROM word 1 0x9710. > 3c509 EEPROM word 2 0x879d. > 3c509 EEPROM word 8 0x0010. > 3c509 EEPROM word 9 0x7000. > eth3: 3c509 at 0x300 tag 1, 10baseT port, address 00 60 97 10 87 9d, IRQ > 7. > 3c509.c:1.16 (2.2) 2/3/98 [EMAIL PROTECTED] > 3c509 EEPROM word 7 0xffff. > > ... and ifup eth3: > > [root@lcjdap ~]# ifup eth3 > Updating the statistics. > Updating the statistics. > eth3: Opening, IRQ 7 > > status@30e 0001. > eth3: Opened 3c509 IRQ 7 status 2000. > eth3: Setting Rx mode to 1 addresses. > Updating the statistics. > eth3: el3_start_xmit(length = 60) called, status 2000. Incearca sa scoti din bios portu' paralel care in mod normal iti ocupa irq7. Dupa aia incearca sa-l faci sa nu-ti mai incarce modulul parport... Dupa aia verifica sa nu ai pci shared cu isa, ca lasa de dorit la managementul intreruperilor... Eth2 unde este ? Placa e buna ( ai incercat sa o lasi singura?) ? [EMAIL PROTECTED] --- Send e-mail to '[EMAIL PROTECTED]' with 'unsubscribe rlug' to unsubscribe from this list.
