uite ai aici driver pentru nullmodem !:)
---------------
Euroweb Romania S.A.
System Administrator
[EMAIL PROTECTED]
http://www.euroweb.ro/
AC2185-ROTLD
On Thu, 11 Jan 2001, Doom wrote:
>
> > am facut io pe vreo 300 m...
> >
> > baga si tu cablu d-ala infectzios de la RTL, cu 2 fire + otzel, care merge
> > intins vr-un kilometru prin aer, daca ai nevoie am io o rola de 500m acasa
> > .. :)
> >
> > si merge bine ... ca modemu de bine...
>
> Eu le-am legat cu cabblu dintr-ala cu 4 fire, adica dintr-ala cum se leaga
> la priza RTL ... asa ca nu mai e nevoie de sarme ... dar nu stiu cum sa le
> leg cu un win ... ce trebuie sa fac pe acest win de rahat ??? Asta e
> problema mea. Pe linux-uri le-am legat si mere super, dar ... win sucks.
>
> Thanx,
> Cosmin
>
> --
> SysAdm @ "Alexandru Papiu Ilarian" Highschool Dej
> <[EMAIL PROTECTED]>
> <http://lapd.cj.edu.ro/~doom>
> <+40-93.514.225>
> It's nice to be important
> But is more important to be nice
> ---
>
>
> ---
> Send e-mail to '[EMAIL PROTECTED]' with 'unsubscribe rlug' to
> unsubscribe from this list.
>
-- Attached file included as plaintext by Listar --
-- File: nullmodem.inf
; MDMCBX.INF
; Revision 1: 5 November 1995
; Revision 2: 13 November 1995
; - added support for speeds > 19200
; Revision 3: 11 December 1995
; - fixed hangup bug
; - manual dial option not needed anymore
; Revision 4: 2 March 1996
; - cleaned out some junk :)
; compiled by Kevin Wells 1995
; portions of .INF file copyright Microsoft Corp 1993-1995
; This file may be freely distributed and modified as
; long there is no charge for the file. Please contact
; the author with any suggestions or improvements at
; [EMAIL PROTECTED] This file is a cut-paste of the
; hayes modem file. If someone cuts down the extraneous lines, send
; me a copy!
; This file and more detailed tips and instructions may be
; obtained at:
; http://www.vt.edu:10021/K/kewells/net/
; If you have problems accessing the above URL, your browser may
; not put index.html at the end of the URL by default. Instead,
; you may want to try:
; http://www.vt.edu:10021/K/kewells/net/index.html
; *** This file only explains the installation of this
; driver file and does NOT _fully_ explain how to set up
; a SLIP connection on the net. You may email me at
; [EMAIL PROTECTED] with any problems, but please check out
; http://www.windows95.com first. It is _very_ helpful
; and includes step-by-step instructions on setting up
; a generic SLIP connection.
; You need to have the following correctly installed:
; 1) Dial-up networking with TCP/IP
; 2) If you plan to run a SLIP connection, you need to
; have the SLIP drivers installed. These are located
; under admin\dscript in the distribution
; directory on the Windows 95 CD. You can also find
; these and installation instructions at
; http://www.windows95.com
; Instructions:
; 1) Copy this file to a safe place (on a floppy or
; somewhere on your hard drive)
;
; 2) Go to the control panel and click "Modems"
; 3) Click the Add... button
; 4) In the next window, check the "don't detect..."
; box and then click the "Next>" button.
; 5) Click on "Have disk" and in the next dialog box enter
; in the path to the file that you copied in step one
; (don't include the file name, only the path)
; 6) Click on "Direct Connection"
; 7) Click on the "Next>" button.
; 8) Click on the port where you direct connection is and
; then click on the "Next>" button. For most Tech
; computers purchased from IBM, this is usually COM1.
; 9) Windows will think for a little bit and prepare the
; driver. After it is done, click the "Finish"
; button. The title of the modem should appear in the
; next window.
; 10) Click "Close"
; 11) Go into dial up networking and make a new
; connection.
; 12) When the dialog box comes up select the direct
; campus connection as your modem and click configure
; 13) In the options tab, click "operator assisted or
; manual dial" and continue setting it up!
; VIRGINIA TECH: You do not need to do step 13.
; OTHERS: If you can get your host to echo a <cr> to <cr>
; then you can also not do step 13. You may want to fool around with
; the strings down below, but some weird things happen when you do,
; so be careful! As a last resort, you can do step 13.
; 14) If you are not running SLIP, you may want to click the boxes
; that say "bring up terminal screen..." If you have the
; SLIP drivers, a screen will come up automatically; you
; do not need to click these boxes.
; NOTE: It does _not_ matter what you put in for the phone number when
; Windows 95 asks you for one. My driver file does not use it.
; Enjoy your new 32-bit connection!
; Kevin Wells
; [EMAIL PROTECTED]
; http://www.vt.edu:10021/K/kewells/
[Version]
Signature="$CHICAGO"
Class=Modem
Provider=%VTech%
[Manufacturer]
%Tech%=Tech
[Tech]
%Rolm% = Rolm, UNIMODEM105DA558
;%Rolm% = Rolm, UNIMODEM76DBB0AA
[Rolm]
AddReg=All, Common, RolmReg, EXTERNAL
[All]
HKR,,FriendlyDriver,,Unimodem.vxd
HKR,,DevLoader,,*VCOMM
HKR,,PortSubClass,1,02
HKR,,ConfigDialog,,modemui.dll
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"
[EXTERNAL]
HKR,, DeviceType, 1, 01
[Common]
; Hayes standard init/monitor/answer mechanisms. Override if different for a specific
modem/manufacture
HKR, Init, 1,, "<cr>" ; do an "AT" to get autobaud correct (start other init strings
with 2)
HKR, Monitor, 1,, ""
HKR, Monitor, 2,, ""
HKR, Answer, 1,, "None"
HKR, Hangup, 1,, ""
HKR,, Reset,, "None" ; slam in a reset before closing
HKR, Settings, Prefix,, ""
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, DialPrefix,, "D"
HKR, Settings, DialSuffix,, ""
HKR, Settings, CallSetupFailTimer,, ""
HKR, Settings, InactivityTimeout,, ""
HKR, Settings, SpeakerVolume_Low,, "L0"
HKR, Settings, SpeakerVolume_Med,, "L2"
HKR, Settings, SpeakerVolume_High,, "L3"
HKR, Settings, SpeakerMode_Off,, "M0"
HKR, Settings, SpeakerMode_Dial,, "M1"
HKR, Settings, SpeakerMode_On,, "M2"
HKR, Settings, SpeakerMode_Setup,, "M3"
HKR, Settings, FlowControl_Off,, "&K0"
HKR, Settings, FlowControl_Hard,, "&K3"
HKR, Settings, FlowControl_Soft,, "&K4"
HKR, Settings, ErrorControl_Off,, "&Q6S36=3S48=128"
HKR, Settings, ErrorControl_On,, "&Q5S36=7S48=7"
HKR, Settings, ErrorControl_Forced,, "&Q5S36=4S48=7"
HKR, Settings, Compression_Off,, "S46=136"
HKR, Settings, Compression_On,, "S46=138"
HKR, Settings, Modulation_CCITT,, "B0"
HKR, Settings, Modulation_Bell,, "B1"
HKR, Settings, SpeedNegotiation_Off,, "N0"
HKR, Settings, SpeedNegotiation_On,, "N1"
HKR, Settings, Pulse,, "P"
HKR, Settings, Tone,, ""
HKR, Settings, Blind_Off,, "X4"
HKR, Settings, Blind_On,, "X3"
[RolmReg]
HKR, Init, 1,, "<cr>"
HKR, Init, 2,, "NoResponse"
HKR, Monitor, 1,, "Monitor"
HKR, Answer, 1,, "CLIENTSERVER"
HKR, Answer, 2,, "NoResponse"
HKR, Settings, DialPrefix,, ""
HKR,, Properties, 1, 80,01,00,00, ff,00,00,00, ff,00,00,00, 07,00,00,00, 0f,00,00,00,
f7,03,00,00, 00,c2,01,00, 40,38,00,00
;HKR, Responses, "CLIENT", 1, 08, 00, 00, 00, 00, 00, 00,00,00,00 ; Server side
- the client is requesting a connection
;HKR, Responses, "<h00>CLIENT", 1, 08, 00, 00, 00, 00, 00, 00,00,00,00 ; Server side
- the client is requesting a connection
HKR, Responses, "<cr>", 1, 02, 00, 00, 00, 00, 00, 00,00,00,00 ; Client side - the
server has acknowledged and the connection is completed
[Strings]
VTech = "Virginia Tech"
Tech = "Virginia Tech"
Rolm = "Direct Connection"
---
Send e-mail to '[EMAIL PROTECTED]' with 'unsubscribe rlug' to
unsubscribe from this list.
