Chiar nu are nimeni nici o idee?
Dragos Traian Georgescu wrote:
>
> Salutare la toata lumea!
>
> Am si eu urmatoarea problema:
>
> Se da un RAID hardware ADAPTEC D2100S bagat intr-un sistem pe care
> ruleaza RH6.2
>
> Dupa instalarea de pe cedeu in mod expert (ca sa poti sa-i specifici
> driveru' de RAID care in distributie e gresit) totul merge OK.
>
> Ghinionul este ca-mi trebuie musai cel putin kernel 2.2.16 (distributia
> vine cu 2.2.14), asa ca am incercat sa compilez 2.2.18 (daca tot exista
> ;), dar nu vrea de loc sa plece. Au fost incercate 2 metode (folosind
> "driverele" de la adaptec):
> 1. cu instalarea suportului I2O ca modul (bineinteles cu completarea
> corespunzatoare a lu' conf.modules si generarea lu' initrd-2.2.18.img)
> 2. cu instalarea suportului I2O in kernel.
>
> La bootare in cazul 1 (ca modul) am urmatorul mesaj:
>
> eepro100.c: VA Linux custom .....
> Partition check:
> P6 Microcode Update Driver V1.05 registered
> request_module[block-major-8]: root fs not mounted
> VFS: Cannot open root devices 08:11
> Kernel panic: VFS: Unable to mount root fs on 08:11
>
> La bootare in cazul 2:
>
> scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.31/2.3.4
> <Adaptec AIC-7899 Ultra 160/m SCSI host adapter>
> scsi2 : DPT SmartRAID V
> scsi : 3 hosts
> Unable to handle kernel NULL pointer defence at virtual address 00000000
> current->tss.cr3 = 00101000, %cr3 = 00101000
> *pde = 00000000
> Oops: 0000
> CPU: 0
> EIP: 0010:[<00000000>]
>
> GTD care dupa ce a "sapat" 4 zile a dat de piatra in loc de apa :(
>
> ---
> Send e-mail to '[EMAIL PROTECTED]' with 'unsubscribe rlug' to
> unsubscribe from this list.
---
Send e-mail to '[EMAIL PROTECTED]' with 'unsubscribe rlug' to
unsubscribe from this list.
