Salut!
Am un monitor PGA shpan dintr-asta care merge la 1024x768 interlaced.
De curand am updatat la RH 7.0 si nu mai reusesc sa-l pornesc in 1024x768.
Sectiunea corespunzatoare din XF86Config-4 arata asa:
Section "Monitor"
Identifier "My Monitor"
VendorName "Unknown"
ModelName "Unknown"
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace
HorizSync 31.5-35.5
VertRefresh 50-90
EndSection
(linia aia cu Modeline am copiat-o din vechiu config)
Placa e:
First video: Super-VGA
Chipset: Cirrus CL-GD5446 (PCI Probed)
Memory: 1024 Kbytes
RAMDAC: Cirrus Logic Built-in 8-bit pseudo-color DAC
(with 6-bit wide lookup tables (or in 6-bit mode))
si pana acum a fost totul Ok.
Liniile relevante din outputul lui startx sunt:
(--) CIRRUS(0): VideoRAM: 1024 kByte
(==) CIRRUS(0): Min pixel clock is 12 MHz
(--) CIRRUS(0): Max pixel clock is 135 MHz
(II) CIRRUS(0): My Monitor: Using hsync range of 31.50- 36.00 kHz
(II) CIRRUS(0): My Monitor: Using vrefresh range of 50.00- 90.00 Hz
(II) CIRRUS(0): Clock range: 12.00 to 135.10 MHz
(WW) CIRRUS(0): Mode "1024x768" deleted (bad mode clock/interlace/doublescan)
So banuiesc ca parametrii la ModeLine nu sunt in regula.
Ma poate ajuta cineva?
Thx,
Radu
---
Send e-mail to '[EMAIL PROTECTED]' with 'unsubscribe rlug' to
unsubscribe from this list.
