On 14 Jun 2001 23:32:27 +0300, Mitrana Cristian wrote:
>
> Salut,
> vreau sa fac urmatoarea chestie : sa pun pe calculatorul
> meu inca o "retea" in afara de cea la care sunt conectat
> deja (clasica 192.168.1.0) si m-an gandit sa fac nu alias
> pe eth0.
> Asa ca am dat :
> ifconfig eth0:0 192.168.101.1 up
> dar cand la :
> route add -net 192.168.101.1 dev eth0:0
> primesc un SIOCADDRT: Invalid argument.
> Kernelul este 2.4.3.
In primul rind ca -net x.y.z.1 e cam ciudat. Poate ai vrut sa zici
x.y.z.0
In al doilea rind, la kernel-2.4 nu mai trebuie sa faci faza cu route
add dupa ifconfig up.
Uite la mine:
[root@stantz /root]# ifconfig eth1:1 192.168.101.1 up
[root@stantz /root]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
192.168.100.0 192.168.0.2 255.255.255.0 UG 0 0 0
eth1
192.168.101.0 0.0.0.0 255.255.255.0 U 0 0 0
eth1
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0
eth1
130.62.175.0 0.0.0.0 255.255.255.0 U 0 0 0
eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0
lo
0.0.0.0 130.62.175.1 0.0.0.0 UG 0 0 0
eth0
[root@stantz /root]#
Cu alte cuvinte, dupa ifconfig up, ruta pe clasa respectiva a aparut
"automagic". ;-)
--
Florin Andrei
---
Send e-mail to '[EMAIL PROTECTED]' with 'unsubscribe rlug' to
unsubscribe from this list.
